Operation Console config problems

["Henrik Krebs" <hkrebs@xxxxxxxxx>]

Hi all

For your information here is a tip if you will install 'Operation Console'
(V4R3) in stead of the old CA Console. IBM used 3 months and lots of
manpower to find it, so it's valuable. 

We are talking about local console via a cable directly from PC's COMx: to
first serial card. All new servers only include this cable.

Allthough the manuals mentions nothing about it both "AS400 Operations
Console Connection" and COMx: on the PC must be set to 115200 bps.

Have any of you out there an 'Operation Console'? I would like to hear from
you:

Was the installation smooth?
What is the speed?
Was this defaulted on beforehand?
Plase send me a mail (off-list mailto:hkrebs@hkrebs.dk) about this.



Regards

Henrik Krebs

------------------------------------------------------------
Henrik Krebs
IT Consultant (IBM AS/400)
Phone +45 55 44 26 50
Mobile +45 40 88 83 23
Email: hkrebs@hkrebs.dk
Web: http://www.hkrebs.dk/
Snailmail: Kokhaven 8, DK-4736  Karrebaeksminde
------------------------------------------------------------
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---