Re: Question on the "good ole" IBM 4234 Printer

[Chuck Lewis <CLEWIS@xxxxxxxxxx>]

SO far so good !

But thanks Krys and EVERYONE else who responded... Things are rolling GREAT now 
and the
printer are LABELED with this instructions !!

Chuck

Krys Theodore wrote:

> Just a small comment....When you start on that first page they have a 
>tendency to jam.
>
> ----------
> From:   Bill Robins[SMTP:brobins@ix.netcom.com]
> Reply To:       MIDRANGE-L@midrange.com
> Sent:   Friday, January 22, 1999 8:17 AM
> To:     Midrange Discussion List
> Subject:        Re: Question on the "good ole" IBM 4234 Printer
>
> Chuck,
>
> You were right on the outside of the answer.  We have the instructions in bold
> print above the printers.  Stop, New Page, Eject, (tear off paper), Start,
> Start.
>
> Bill
>
> > My question is on "removing" printed material... The form we have is 8
> > 1/2 inches in length. I press Stop, Eject which feeds the printed form
> > forward and Start which drops the remaining forms out the bottom of the
> > printer. So I guessed it doesn't work the same as the 4230 which
> > repositions the form just FINE... So I press Stop, New Page (twice I
> > think it was), tear the printed form off and press Start. This wastes 2
> > forms and these are preprinted, 3 part carbonless forms and this COULD
> > get expensive
> >
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---