Re: Attaching HP Laser Printers to the AS/400

I'm sure others have mentioned the MPI Blue Kit SIMM and DIMM modules.  We have
roughly 12 - HP5si/5si MX, 1 - HP4si, 2 - HP8000N and 4 - HP4000N printers using
the MPI SIMM's.  They all work great!  The MPI Blue Kit is a bit pricey but 
setup
is easy and rarely have a problem with the printers.

Danny Mc?


Richard Rosenbluth wrote:

> We have had good performance using internal MIO cards from I-O.  The
> setup is straightforward, and once setup they function as part of the HP
> printer.  Cards are about $500 with a parallel port for PC or LAN
> sharing.
>
> Another simple option is a "pigtail" type external adapter from Priam.
> Also about $500 with shareable parallel port pass-through.  If you have
> an available MIO slot in the printer, the only advantage of the external
> solution is portability, the disadvantage is extra wires to manage.
> --
> Richard Rosenbluth
> Rose Information Management Co.
> mailto:rose400@pacbell.net
> -------------------------------
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---



+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---