× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Re: DDM over TCPIP
  • From: Patrick Townsend <townsend@xxxxxxxxxxxxxx>
  • Date: Tue, 29 Sep 1998 18:48:18 -0700
  • Organization: Patrick Townsend & Associates, Inc.

If I recall correctly the two AS/400s were connected over a LAN. TCP/IP
and SNA can co-exist on the same Ethernet and SNA LAN. would be be
possible just to configure two SNA APPC controllers and use normal DDM?

Patrick

Rob Berendt wrote:
> 
> I looked at the help on the command CRTDDMF under the field remote location 
>and noticed the following:
> 
>                  Remote location (RMTLOCNAME) - Help
> Specifies the remote (target) system location name used with the
> distributed data management (DDM) file.  The remote location name
> does not have to be defined before the DDM file is created, but it
> must be defined before the DDM file is opened.
> The possible values are:
> remote-location-name
>     Specifies the name of the remote location associated with the
>     target system.
> More information on remote locations is in the APPC Programming
> book, SC41-5443.
> 
> Judging by the comment about APPC programming I would suspect that TCP/IP and 
>DDM are exclusive.  You need APPC to use DDM.
> 
> wayne@redoaktech.com on 09/29/98 02:35:51 PM
> Please respond to MIDRANGE-L@midrange.com@Internet
> To:     MIDRANGE-L@midrange.com@Internet
> cc:
> Subject:        DDM over TCPIP
> 
> Hello all,
> 
> I'm trying to create a DDM file between two AS/400s that share a common
> TCP/IP network but have no direct connection.  Any thoughts or guidance
> in this is appreciated.
> Thanks,
> Wayne
> --
> --------------------------------------------------------------------
> Wayne Capwell                |      Red Oak Technologies, Inc.
> 11301 Carmel Commons Blvd.   |      ==========================
> Suite 114                    |     Intranet - Internet - AS400
> Charlotte, NC 28226          |  Consulting & Development Services
>                              |
> (704) 525-0038 (ph.)         |        (704) 525-6805 (fax)
> wayne@redoaktech.com         |     http://www.redoaktech.com/
> --------------------------------------------------------------------
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---
> 
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---

-- 

IBM AS/400 communications, FTP automation, and network security
software and consulting services.

mailto:townsend@patownsend.com
http://www.patownsend.com
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.