Re: TCP/IP printing problem

["Marc Zylka" <mzylka@xxxxxxxxxxx>]

Eric,

>I am attempting to connect an Epson DXF5000 printer via a HP Jet Direct EX
>card to the AS/400 version 4.1 - 620 e-series.  I have created the
>following outq description:

  We're running on a 620 at V4R1 and I've set up printing to a Jet
Direct card using the following parameters in the output queue
definition:

    Remote system: *INTNETADR
    Remote printer queue: *NONE
    Connection type: *IP
    Internet address: xxx.xxx.xxx.xxx
    Destination type: *OTHER
    Host print transform: *YES
    Manufacturer type and model: should be fine as you have it

  I did not set up the IP address in the Host Table Entry and it works
fine as defined above.


>Also, we have found that we can not connect to our RISC system using
>NSRouter.  We can connect via TCP/IP.


Don't know about this one.  Ours works fine with NS/Router, we use
NetSoft Elite using Direct TCP/IP or Anynet.

Marc ( mzylka@netpath.net )



+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---