Re: FW: Telnet on the AS400

[bstedman@xxxxxxxxxxxx]

V4R2 is out so you do not have to wait.  Check out the article in the April
6th  InfoWorld on the advantages of this release.  If you do not have
access to it, let me know and I will forward you a copy.

Setting up telnet to an AS/400 is relatively easy.  If you have TCP/IP
already configured on your AS/400, there are a couple of commands to use to
make sure you can TELNET to the AS/400 after you STRTCP:

     STRTCPSVR  *TELNET   and STRHOSTSVR *ALL






Our LAN administrator posed this question to me and unfortunately I don't
have the answer. Can anyone out there help me/us out? We are running on
an AS/400 model 510, OS/400 V3R7. What are the advantages to waiting for
V4R2?  Thanks for your help...
What would be required to set up a basic Telnet session on the 400. I
would want to run a simple Telnet terminal on a pc workstation that could
use TCP/IP via our LAN and connect to the 400. Is it even possible ??Thanks
for any info





+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---