× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Dean:
The Windows terminal program would work as a VT100 emulation connected from
the PCs serial comm port to a port on the ASCII WSC (or protocol converter)
that is configured to emulate a VT100 terminal.  (VT100 is not the only
emulation that works, but is probably the most used.  When you config the
ASCII port you have to specify VT100 for the emulation type, if use the
value of *CALC only IBM terminal emulations are recognized. (ie 3164, 3151,
5250).
HTH.
Carl

At 07:22 PM 1/20/98 EST, you wrote:
>Hey Folks!
>
>I have a new consultant at my primary client that connected to her last
>client's /400 via the "Terminal" program in Windows.  She admits that she
>doesn't know much about how it worked, other than the fact that the F-Keys
had
>to be re-mapped and were still a pain to use.  She's tried to connect to the
>current client (via ASCII workstation controller) using both the same
>methodology and a "free-ware" TN5250 product, to no avail.  Does anyone know
>how she might have done this originally?  Personally, I couldn't imagine how
>"Terminal" could have worked in the first place...
>
>TIA,
>
>Dean Asmussen
>Enterprise Systems Consulting, Inc.
>Fuquay-Varina, NC  USA
>E-Mail:  DAsmussen@aol.com
>
>"A warm smile is the universal language of kindness." -- William Arthur Ward
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to "MIDRANGE-L@midrange.com".
>| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator: david@midrange.com
>+---
>uucp
>
Carl J. Galgano
http://cgalgano.home.mindspring.com
mailto:cgalgano@ediconsulting.com
EDI Consulting Services, Inc.   
540 Powder Springs Street
Suite C19
Marietta, GA 30064
770-422-2995
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to "MIDRANGE-L@midrange.com".
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.