× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: RE: Windoze "Terminal" as 5250 Display Session
  • From: Bob Crothers <bcrothers@xxxxxxxxxxxxx>
  • Date: Wed, 21 Jan 1998 05:40:45 -0000

Dean,

They where dialing into the ASCII workstation controller and the 
windows Terminal program was doing VT-100 emulation.   Actualy, 
not a bad way to do it as just about every comm program in the 
world supports VT100.

The only problem being the keyboard mapping.  It is the same as 
for a telnet session.  Eg: F1 is "Esc 1", F2 is "Esc 2", etc.

Regards,
Bob Crothers
Cornerstone Communications


-----Original Message-----
From:   DAsmussen [SMTP:DAsmussen@aol.com]
Sent:   Tuesday, January 20, 1998 7:22 PM
To:     midrange-l@midrange.com
Subject:        Windoze "Terminal" as 5250 Display Session

Hey Folks!

I have a new consultant at my primary client that connected to 
her last
client's /400 via the "Terminal" program in Windows.  She admits 
that she
doesn't know much about how it worked, other than the fact that 
the F-Keys had
to be re-mapped and were still a pain to use.  She's tried to 
connect to the
current client (via ASCII workstation controller) using both the 
same
methodology and a "free-ware" TN5250 product, to no avail.  Does 
anyone know
how she might have done this originally?  Personally, I couldn't 
imagine how
"Terminal" could have worked in the first place...

TIA,

Dean Asmussen
Enterprise Systems Consulting, Inc.
Fuquay-Varina, NC  USA
E-Mail:  DAsmussen@aol.com

"A warm smile is the universal language of kindness." -- William 
Arthur Ward
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to 
"MIDRANGE-L@midrange.com".
| To unsubscribe from this list send email to 
MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: 
david@midrange.com
+---
uucp

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to "MIDRANGE-L@midrange.com".
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---


As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.