• Subject: Re: TCP/IP & CAw95 configuration troubles
  • From: John Cirocco <jcirocco@xxxxxxxxxx>
  • Date: Wed, 10 Dec 1997 13:11:38 -0500


By chance is your /400   on a different ring or segment?

If it is, you need to specify a default route if you have not done so.  See
Work with TCP/IP routes on CFGTCP menu option 1.

If it is not, have you tried to ping yourself (stop the giggling folks)?  You
should have an entry for *loopback with IP of on the Work with TCP/IP
interfaces.  Try pinging from the /400 command line to the IP address of the
/400.  If for some reason your TCP/IP did not start up properly, this part
would fail.

Hope this helps,
John W. Cirocco

| This is the Midrange System Mailing List!
| To submit a new message, send your mail to "MIDRANGE-L@midrange.com".
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2019 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].