Re: IPL problems

["Rob Ward" <rward@xxxxxxxxx>]

Based on the information given it looks like you have some damaged objects
on the system.  Try running a RCLSTG and see how that affects your IPL
times.

Rob Ward
M-C Industries, Inc.

-----Original Message-----
From: S. Kalyana Sundaram <stgsys@squared.co.in>
To: 'MIDRANGE-L@midrange.com' <MIDRANGE-L@midrange.com>
Date: Monday, November 24, 1997 2:45 AM
Subject: IPL problems


>We recently had a disk unit failure on our AS/400 (V2 R3). Before the
>crash, it took hardly 20 minutes for IPL. After disaster recovery,  we
>accidentally applied all PTFs permanently. (All these PTFs had been applied
>even before but only temporarily). Now the system takes nearly 2 hours for
>IPL.. The IPL proceeds normally until SRC code C900 2AA0. At this code, it
>takes nearly 1 and a half hours (normal time should be less than a minute).
>
>In the manual, this SRC code C900 2AA0 indicates damage object
>notification.
>
>We are not able to understand the reason for this abnormal delay in IPL.
>Can anybody please help us  in figuring out the problem ?
>
>TIA,
>
>GopiPriya,
>
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to "MIDRANGE-L@midrange.com".
>| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator:
david@midrange.com
>+---
>umidr
>

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to "MIDRANGE-L@midrange.com".
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---