HTTP Cfg and Network Stations

[Doug Barnes <Doug.Barnes@xxxxxxxxxxx>]

I recently installed a Network Station and the necessary software on
the 400 (510 @370) to configure and run it. But I must have monkeyed
around with it a little much after it was working because now it
claims it can not contact the login server. When I power the NC on it
goes out and finds the boot server (AS/400) and downloads the 1.9MB
boot file and presents a login screen (not a 400 login). When I enter
my profile and password it says it is unable to contact the login
server.  On the 400 I have restarted TCP/IP ended it and restarted it
and tried reconfiguring the HTTP settings (CFG file).

I also tried to set up HTTP to be able to look at some other HTML
documents, but was unsucessful and I suspect that I may have fouled
up the HTTP config at that time. 

Does anyone out there have the correct settings for the NEtwork
Station HTTP piece?


I'll be away from my office until 8-25-97 but will have limited
access to e-mail and such.

- Doug Barnes -






* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *