Re: Successful FTP Code

Does the 400 create a job log for data transfers started from the PC to
the AS/400
by FTP?  If not, how can I create some kind of log to monitor all FTP
actions?

Vishwanath Nemani wrote:
> 
>  "Terry Glass" <tglass@netpath.net> wrote:
> 
> >For those who requested the code to check for a successful FTP-here it is.
> >I can't take credit, Carl Galgano and Cathy Wilbur supplied most of the
> >bits and pieces.   This code runs on 3 different systems, and I trap the
> >output log so it can be referred to if necessary.  In this case, we're
> >going from an AS400 to a PC-based imaging system.
> >
> 
> There's another way of achieving this.  Code an FTP source code as follows:
> 
> ID PASSWORD
> LS pathname  (DISK
> QUIT
> 
> After executing this FTP session a file LSOUTPUT is created with member
> LSOUTPUT. This file contains the list of all the files from the remote 
>pathname.
> Now in the CL program type following command:
> RTVMBRD FILE(LSOUTPUT) NBRCURRCD(&NBRCURREC1)
> This will give you the number of files existing in the remote path.
> 
> Now,  add the second line( LS pathname  (DISK )  in your original FTP source
> code after the PUT command (shown below).
> 
> >Part 1-FTP TEXT
> >ID PASWORD
> >ASCII
> >PUT LIB/FILE1 '''PC FILE'''
> LS pathname  (DISK
> >QUIT
> >
> 
> Now in the CL program type following command:
> RTVMBRD FILE(LSOUTPUT) NBRCURRCD(&NBRCURREC2)
> 
> The CL program can be something like this:
> 
> PGM
> 
>   execute the first FTP source code
>   RTVMBRD FILE(LSOUTPUT) NBRCURRCD(&NBRCURREC1)
> 
>   execute your original FTP source code
>  RTVMBRD FILE(LSOUTPUT) NBRCURRCD(&NBRCURREC2)
> 
>   /*check to see if the file was transferred successfully or not. */
> 
>  IF COND(&NBRCURREC2 *GT &NBRCURREC1)
> 
>       /*      "File transfer successfull...."        */
> 
>   ELSE
> 
>       /*      "File transfer Unsuccessfull...."         */
> 
> ENDPGM
> 
> 
> HTH
> 
> Vishwanath Nemani
> 
> >Part 2-CL program
> >             PGM
> >
> >             DCL        VAR(&SYSNAM) TYPE(*CHAR) LEN(8)
> >             DCL        VAR(&MEMBER) TYPE(*CHAR) LEN(10)
> >
> >             DCLF       FILE(QTEMP/FTPLOG)
> >
> >/* Create temp file to capture FTP log                              */
> >             CRTPF      FILE(QTEMP/FTPLOG) RCDLEN(132)
> >             MONMSG     MSGID(CPF0000) EXEC(CLRPFM FILE(QTEMP/FTPLOG))
> >
> >/* Get system name & determine which FTP source to use              */
> >             RTVNETA    SYSNAME(&SYSNAM)
> >
> >             IF         COND(&SYSNAM *EQ 'SYSTEM 1') THEN(DO)
> >             CHGVAR     VAR(&MEMBER) VALUE('IMGSYS1')
> >             ENDDO
> >             IF         COND(&SYSNAM *EQ 'SYSTEM 2') THEN(DO)
> >             CHGVAR     VAR(&MEMBER) VALUE('IMGSYS2')
> >             ENDDO
> >             IF         COND(&SYSNAM *EQ 'SYSTEM 3') THEN(DO)
> >             CHGVAR     VAR(&MEMBER) VALUE('IMGSYS3')
> >             ENDDO
> >
> >
> >/* Override files, then perform FTP                                 */
> >             OVRDBF     FILE(INPUT) TOFILE(LIB/FTPSRC) MBR(&MEMBER)
> >             OVRDBF     FILE(OUTPUT) TOFILE(QTEMP/FTPLOG)
> >
> >             STRTCPFTP  RMTSYS(PCIMGSRVR)
> >
> >/* Trap FTP log in case it may be needed                            */
> >             CPYF       FROMFILE(QTEMP/FTPLOG) TOFILE(LIB/FTPLOG) +
> >                          MBROPT(*REPLACE) CRTFILE(*NO) FMTOPT(*NOCHK)
> >
> >/* Scan FTPLOG, if SUCCESSFUL TRANSFER (226) found, clear FILE1;    */
> >/* else send operator message to check FTP status                   */
> > RCVF:       RCVF
> >             MONMSG     MSGID(CPF0000) EXEC(GOTO CMDLBL(ERROR))
> >             IF         COND(%SST(&FTPLOG 1 3) *EQ '226') THEN(DO)
> >             CLRPFM     FILE(LIB/FILE1)
> >             SNDPGMMSG  MSG('FTP transfer of BL data to Imaging +
> >                          completed successfully') TOUSR(*SYSOPR)
> >             GOTO       CMDLBL(DONE)
> >             ENDDO
> >             ELSE       CMD(DO)
> >             GOTO       CMDLBL(RCVF)
> >             ENDDO
> >
> > ERROR:      SNDPGMMSG  MSG('FTP transfer of BL data to Imaging did +
> >                          NOT complete successfully.  Please verify +
> >                          that FTP is working both at this location +
> >                          and at the corporate Imaging system +
> >                          before retrying.  Please reply with your +
> >                          User ID now.') TOUSR(*SYSOPR) MSGTYPE(*INQ)
> >
> > DONE:       DLTOVR     FILE(INPUT)
> >                  DLTOVR     FILE(OUTPUT)
> >
> >             ENDPGM
> >
> >The code could probably be shorter, but it works.
> >
>
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *