Re: IBM ProPrinter XL Configs

Jera Anderson wrote:
> 
> I have gotten my hands on an IBX Proprinter XL for almost
> nothing recently at an auction.  And, as luck would have
> it, no documentation.
> 
> Attached to a DD 3596 terminal I have the following config
> options:
> 
> Emulation 2:  5225-4    5256-3  4214-2
> 
> Character Set: 0123456789ABCDEM
> 
> Attached Printer Character Set:850  437   DL    ASCII
> 
> All my combinations have produced something akin to
> speaking in tongues!  Either that or a very good
> indication of why I got the machine for 'almost nothing'.
> 
> Any suggestions?
> 
> TIA,
> Jera Anderson
> IS MANAGER
> -------------------------------------
> E-mail: calvert1@felix.teclink.net
> Date: 05/27/97
> Time: 15:49:55
> -------------------------------------

4214 is the closest. If that doesn't work, do you have an IBM 348x? They
all should have 4202 (which is the IBM machine type for the original
Proprinter XL). 

I seem to remember it was more important to configure the device
properly on the 400 than at the workstation. First, activate the pariner
port on the terminal, power it off & back on. If your 400 has QAUTOCFG
set to '1', it should be there as PRTxx (you can rename it later).

Go with the ASCII charset.

-- 
Francis Lapeyre                    flapeyre@communique.net
----------------------------------------------------------
"The probability of life originating from accident is 
comparable to the probability of the Unabridged Dictionary
resulting from an explosion in a printing factory." 

Prof. Edwin Conklin

****** If you spam me, you will incur the wrath of your Internet **
****** Service Provider. I KNOW who you REALLY are!!***************

Opinions are my own. Otherwise, they are someone else's.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *