Re: Memorex 1477C - AS/400 - HP4 printing problem

It sounds like the printer setup on the twinax terminal has been altered.
Possible the equivalent of the setting on 3197's that determine whether
you have 10(cpi) 15(cpi) or SY (system defined).  Check the manual (if 
you have one) for the 1477C - or just experiment with the SETUP feature.



On Wed, 7 May 1997, Kathy Lynett wrote:

> We have a Memorex 1477C with an HP4 printer attached, connected to our
> AS/400 (V3M1)    This senerio has worked succesfully for a couple of years
> in that the info we print to it from the /400 accepts cpi changes from the
> /400 program.  We recently relocated this device (in the wiring closet) to
> another port and controller.  When the printer would not auto-config, we
> moved it back to where it was originally.  The original device descriptions
> were never removed let alone altered in any way.  NOW the printer doesn't
> pick up the cpi changes from the /400 program any more and we get a blank
> page spit out before each printout.  Can anyone tell me what has happened
> and how to rectify the situation?
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> * This is the Midrange System Mailing List!  To submit a new message,   *
> * send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
> * this list send email to MAJORDOMO@midrange.com and specify            *
> * 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
> * should be directed to the list owner / operator: david@midrange.com   *
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> 
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *