|
Yes - at the time of my original answer I was unaware of the RUNRMTCMD that Jeff Silberberg mentioned in his reply. This command was new at V3R1. The RS/6000 must be running the "rexecd" daemon. RUNRMTCMD can also be used to run a command on the new CA/400 optimized clients, but you must use the *SNA option in this case. This uses the "arexecd" APPC daemon. I believe that in V3R1 & V3R6 the RUNRMTCMD was only installed with the (no charge) OS/400 option 12 (Host Servers), but was moved into the base OS/400 code with V3R6 (and I presume V3R2). On Thu, 24 Apr 1997, Carl Galgano wrote: > Thanks for the info, I have forwarded it along to my client. > BTW, can the RUNRMTCMD CL command be used?? It seems to allow you to > defined *IP as a link type. When I tried it, I get a message (acually a > spool file) that says Login incorrect, even thought I'm sure the user name > and password I am specifying of the command is correct. Is there some sort > of set up or configuration on the RS6000 that needs to be done, like > starting the REXECD > daemon?? > Regards, > Carl > > At 07:27 PM 4/23/97 -0400, you wrote: > >Carl Galgano wrote: > >> > >> I have a client who has an AS400 & RS6000 on an ethernet network. We are > >> currently using FTP to transfer files and it works fine. The AS400 is the > >> client and the RS6000 is the server. > >> > >> We now have a requirement that the AS400 run the program on the RS6000 that > >> creates the file that is to be transfered to the AS400. I would like to >add > >> an FTP command in my FTP script that will allow me to do this. The RS600 > >> programmer to me to use the following to execute the program from a $ >prompt > >> on the RS6000: > >> > >> run pgmname > >> > >> I thought I could use the QUOTE subcommand to do what I wish to do what I > >> need, something like this: > >> > >> QUOTE run stc.322gatex > >> > >> However the server comes back and says that RUN is not recognized. See the > >> screen below. Does anyone sknow if this can be done, and if it can, how do > >> I do it. > > > >One solution is software to allow you to submit jobs to the REXECD > >daemon on the RS/6000. One such piece of software is "IBM Connection > >Program/400" (5798-RZB for CISC, 5798-TBE for RISC) that provides a CL > >command called STRUNXCMD. > >It also contains a STRUNXWTR command, to allow you to direct AS/400 > >output queue to the RS/6000, as well as 5250 emulation from the RS/6000 > >for ASCII workstations & Xstations. > >It also provides access from RS/6000 to AS/400 database via remote SQL. > >Communication is either TCP/IP or SNA. > > > >You may not care for the price - $3,220 Canadian - or US$2,400. > > > >The STRUNXCMD looks like this: > > > > Start UNIX Command (STRUNXCMD) > > > > Type choices, press Enter. > > > > Connection Type . . . . . . . . CONTYPE > *TCP > > TCP/IP Remote System Name . . . RMTSYS > > > > Command to Execute . . . . . . . CMD > > > > Remote User . . . . . . . . . . USER > > Remote User Password . . . . . . PWD > > > >or for *APPC > > Start UNIX Command (STRUNXCMD) > > > > Type choices, press Enter. > > > > Connection Type . . . . . . . . CONTYPE > *APPC > > APPC Remote Location Name . . . RMTLOCNAME > > Command to Execute . . . . . . . CMD > > > > Remote User . . . . . . . . . . USER > > Remote User Password . . . . . . PWD > > > >-- > >...Neil Palmer AS/400~~~~~ > >...Technical Specialist ____________ ___ ~ > >...NxTrend Technology - Canada |OOOOOOOOOO| ________ o|__||= > >...Markham, Ontario, Canada |__________|_|______|_|______) > >...Phone: (905) 731-9000 x238 oo oo oo oo OOOo=o\ > >...e-mail: neil@systemetrix.ca ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > >* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > >* This is the Midrange System Mailing List! To submit a new message, * > >* send your mail to "MIDRANGE-L@midrange.com". To unsubscribe from * > >* this list send email to MAJORDOMO@midrange.com and specify * > >* 'unsubscribe MIDRANGE-L' in the body of your message. Questions * > >* should be directed to the list owner / operator: david@midrange.com * > >* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > >uucp > > > Carl J. Galgano > EDI Consulting Services, Inc. > 540 Powder Springs Street > Suite C19 > Marietta, GA 30064 > 770-422-2995 > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > * This is the Midrange System Mailing List! To submit a new message, * > * send your mail to "MIDRANGE-L@midrange.com". To unsubscribe from * > * this list send email to MAJORDOMO@midrange.com and specify * > * 'unsubscribe MIDRANGE-L' in the body of your message. Questions * > * should be directed to the list owner / operator: david@midrange.com * > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * This is the Midrange System Mailing List! To submit a new message, * * send your mail to "MIDRANGE-L@midrange.com". To unsubscribe from * * this list send email to MAJORDOMO@midrange.com and specify * * 'unsubscribe MIDRANGE-L' in the body of your message. Questions * * should be directed to the list owner / operator: david@midrange.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2025 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
midrange.com
