Fw: [MI400] Problem in syncronising AS40o time to windows 2000 server.

["Leif Svalgaard" <leif@xxxxxxxx>]

x-post 
----- Original Message ----- 
From: vsmanju <vsmanju@xxxxxxxxxxx>
To: <mi400@xxxxxxxxxxxx>
Sent: Tuesday, July 22, 2003 10:30 PM
Subject: [MI400] Problem in syncronising AS40o time to windows 2000 server.


> Hi,
> 
> I have a problem in SNTP Client, I am trying to sync the time
> with Windows2000 server. I tried changing the QUTCOFFSET system value
> and then starting the TCPSVR *NTP, and also tried changing CHGNTPA
> values. But the same error is coming showing the time difference of
> UTC. Please advice as to how I can proceed to Synchronize the time
> between windows2000 server and AS400.
> 
> Thanking you in advance
> 
> 
> Regards
> 
> Manju
> 
> 1. On server side the windows time services is enabled on the the
> server.
> 
> 2. On AS400 side 
> 
> AS400 version V5R1 model 720 and the machines are in different segments
> but on the same network.
> ------------------------------------------------------------------------
> ---------------------
> CHGNTPA IS 
> 
> Remote system  . . . . . . . . .   'servername.domain.com'
> 
> Autostart  . . . . . . . . . . .   *YES          *SAME, *NO, *YES
> Poll interval  . . . . . . . . .   60            1-1440 minutes, *SAME
> Minimum adjustment . . . . . . .   300           20-300000
> milliseconds...
> Maximum adjustment . . . . . . .   20            5-30 minutes, *SAME
> Activity log . . . . . . . . . .   *POLL         *SAME, *NONE, *CHANGE,
> *POLL
> 
> ------------------------------------------------------------------------
> -----------------------
> 
>                              Display System Value
> 
> System value . . . . . :   QUTCOFFSET
> Description  . . . . . :   Coordinated universal time offset
> 
> 
> Offset . . . . . . . . :   -00:00     -24:00 to +24:00
> ------------------------------------------------------------------------
> ----------------------
> 
> When I start the TCPSVR  *NTP I am getting the following error message
> please help.
> 
> ------------------------------------------------------------------------
> -------------------------
> Additional Message Information
> Message ID . . . . . . : TCP9138 Severity . . . . . . . : 40
> Message type . . . . . : Diagnostic
> Date sent . . . . . . : 07/22/03 Time sent . . . . . . : 12:57:19
> Message . . . . : The maximum adjustment threshold for the SNTP Client
> has
> been exceeded, SNTP clock is not set.
> Cause . . . . . : The software clock UTC time is 07/22/03 12:57:18. The
> NTP
> server UTC time is 07/22/03 7:33:39. The difference in time between the
> 2
> clocks is -323 minutes. The maximum allowed time adjustment is 30
> minutes.
> Recovery . . . : If the time difference between the 2 clocks is less
> than
> 30 minutes, Use CHGNTPA to set the MAXADJUST to a value greater than the
> difference between the 2 clocks. If the time difference between the 2
> clocks
> is greater than 30 minutes, use WRKSYSVAL to make sure QTIME and QDATE
> are
> set correctly. Make sure QUTCOFFSET is also set correctly. Daylight
> savings time changes may cause the values to be incorrectly set.
> 
> _______________________________________________
> This is the MI Programming on the AS400 / iSeries (MI400) mailing list
> To post a message email: MI400@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/mi400
> or email: MI400-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/mi400.
>