Hi Teresa
We've been live at release 9 Since September 2010 and modified in
house the print programs for AMIPJB procedure to print shop floor
packets with no issues (we only print the bom and routing on card see
below)
We added a user program call from program AMI4H (multiple books) to
print the routings/Boms as we wanted
In format BOM at top of page then routings below
We also sorted the BOM into ops where used sections
These changes were done at 6 and 7.8 and migrated to release 9
We still use the IM options for printing in IDF Level 1 but I think the
same programs are called from OBPM in powerlink. We will switch to this
option once fully tested and changes have been applied to latest source
code.
I meant to say that we no longer print the full shop packet, the
material and operation dockets were eliminated in 2001 when we
introduced the excellent 'paperless PLMC' software supplied from Infor
partner paperless llc
We will also be moving to the new 'paperless mes suite' shortly which
will give the opportunity to eliminate a lot of the remaining paper
produced
Please get in touch if you require any more information
John Henrick
GKN Aerospace.
message: 1
date: Tue, 17 Jan 2012 07:48:29 -0500
from: "Teresa Biby" <TBiby@xxxxxxx>
subject: [MAPICS-L] Shop Packet Worksheet
Has anyone customized the way the shop packet prints? We are wanting a
more concise listing of components and clearer view of the routing on
the shop packet. The routing list and Single Level BOM with Blow Thru
report is almost exactly the way we would like it to print out-has
anyone done anything similar to this? Are there any negative impacts to
changing the MO printout?
We are Release 7.7 and have 9 in test.
Thanks for any help!
Teresa Biby
Virginia Panel Corporation
------------------------------
message: 2
date: Tue, 17 Jan 2012 10:59:33 -0500
from: Jerry_Tweed@xxxxxxxxxxxxx
subject: Re: [MAPICS-L] XA9 Non-Netting Location Enhancement
Richard , thank you very much, This worked for us, however we had to
remove status "PLAN HOLD" then rset locations back to "PLAN HOLD"
Note: As per INFOR other customers have had same issue.
Warmest Regards;
Jerry Tweed, GECOM Corp IT Dept.
812.663.0513
From: "Richard Stover - Guide" <rstover@xxxxxxxxxxxxxxxxxxxxx>
To: "'MAPICS ERP System Discussion'" <mapics-l@xxxxxxxxxxxx>,
Date: 01/13/2012 02:50 PM
Subject: Re: [MAPICS-L] XA9 Non-Netting Location Enhancement
Sent by: mapics-l-bounces@xxxxxxxxxxxx
Jerry, INFOR has change this to be called PLANNING HOLD. To get to the
location settings go to the Materials Mgmt tab of PowerLink and select
the
Warehouse Locations icon, then double-click on the particular location
you
want to be (non-nettable) on Planning Hold, use the search symbol next
to
Inventory Status field to display the available status settings and
select
Planning Hold. See if that does it for you.
Best Regards
Richard (Dick) Stover
Consulting Manager
GUIDE TECHNOLOGIES LLC
INFOR GOLD LEVEL CHANNEL PARTNER
www.guidetechnologies.com
rstover@xxxxxxxxxxxxxxxxxxxxx
215-499-8530
InforFLEX-A clear, fast, and cost effective path to adopt Infor's latest
product innovations.
http://www.infor.com/flex
-----Original Message-----
From: mapics-l-bounces@xxxxxxxxxxxx
[mailto:mapics-l-bounces@xxxxxxxxxxxx]
On Behalf Of Jerry_Tweed@xxxxxxxxxxxxx
Sent: Friday, January 13, 2012 2:24 PM
To: mapics-l@xxxxxxxxxxxx
Subject: [MAPICS-L] XA9 Non-Netting Location Enhancement
911 We are on XA9, Our Production control group needs help setting up
Non-Netting locations.
Note: Material Management is installed.
Example how to populate SLDATA - UUSALM
SLQNTY- UUSALQ
ITEMBL - UUQ1IB
Warmest Regards;
Jerry Tweed, GECOM Corp IT Dept.
812.663.0513
== This message has been scanned for viruses ==
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list To post
a
message email: MAPICS-L@xxxxxxxxxxxx To subscribe, unsubscribe, or
change
list options,
visit:
http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/mapics-l.
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
http://archive.midrange.com/mapics-l.
------------------------------
message: 3
date: Tue, 17 Jan 2012 11:26:28 -0500
from: "Richard Stover"<rstover@xxxxxxxxxxxxxxxxxxxxx>
subject: Re: [MAPICS-L] XA9 Non-Netting Location Enhancement
Glad to help
Sent from my Verizon Wireless Phone
Richard (Dick) Stover
Guide Technologies
215-499-8530
-----Original message-----
From: Jerry_Tweed@xxxxxxxxxxxxx
To: MAPICS ERP System Discussion <mapics-l@xxxxxxxxxxxx>
Sent: Tue, Jan 17, 2012 15:59:33 GMT+00:00
Subject: Re: [MAPICS-L] XA9 Non-Netting Location Enhancement
Richard , thank you very much, This worked for us, however we had to
remove status "PLAN HOLD" then rset locations back to "PLAN HOLD"
Note: As per INFOR other customers have had same issue.
Warmest Regards;
Jerry Tweed, GECOM Corp IT Dept.
812.663.0513
From: "Richard Stover - Guide" <rstover@xxxxxxxxxxxxxxxxxxxxx>
To: "'MAPICS ERP System Discussion'" <mapics-l@xxxxxxxxxxxx>,
Date: 01/13/2012 02:50 PM
Subject: Re: [MAPICS-L] XA9 Non-Netting Location Enhancement
Sent by: mapics-l-bounces@xxxxxxxxxxxx
Jerry, INFOR has change this to be called PLANNING HOLD. To get to the
location settings go to the Materials Mgmt tab of PowerLink and select
the
Warehouse Locations icon, then double-click on the particular location
you
want to be (non-nettable) on Planning Hold, use the search symbol next
to
Inventory Status field to display the available status settings and
select
Planning Hold. See if that does it for you.
Best Regards
Richard (Dick) Stover
Consulting Manager
GUIDE TECHNOLOGIES LLC
INFOR GOLD LEVEL CHANNEL PARTNER
www.guidetechnologies.com
rstover@xxxxxxxxxxxxxxxxxxxxx
215-499-8530
InforFLEX-A clear, fast, and cost effective path to adopt Infor's latest
product innovations.
http://www.infor.com/flex
-----Original Message-----
From: mapics-l-bounces@xxxxxxxxxxxx
[mailto:mapics-l-bounces@xxxxxxxxxxxx]
On Behalf Of Jerry_Tweed@xxxxxxxxxxxxx
Sent: Friday, January 13, 2012 2:24 PM
To: mapics-l@xxxxxxxxxxxx
Subject: [MAPICS-L] XA9 Non-Netting Location Enhancement
911 We are on XA9, Our Production control group needs help setting up
Non-Netting locations.
Note: Material Management is installed.
Example how to populate SLDATA - UUSALM
SLQNTY- UUSALQ
ITEMBL - UUQ1IB
Warmest Regards;
Jerry Tweed, GECOM Corp IT Dept.
812.663.0513
== This message has been scanned for viruses ==
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list To post
a
message email: MAPICS-L@xxxxxxxxxxxx To subscribe, unsubscribe, or
change
list options,
visit:
http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/mapics-l.
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
http://archive.midrange.com/mapics-l.
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
http://archive.midrange.com/mapics-l.
------------------------------
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) digest list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
http://archive.midrange.com/mapics-l.
End of MAPICS-L Digest, Vol 10, Issue 3
***************************************
GKN Aerospace Services
This e-mail and any attachments transmitted with it contain information which is confidential, intended solely for the addressee(s)
and which may also be privileged or exempt from disclosure under applicable law. If you are not the addressee(s), or have received
this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, print, disclose or use any
part of it or its attachments. Internet communications are not guaranteed to be secure or free of any virus. The GKN Group does not accept
liability for any loss or damage arising in any way from changes to this e-mail or its attachments which may occur in transmission
due to network, machine or software failure or manufacturer or operator error, or from unauthorised access or interference with internet
communications by any third party or from the transmission of any viruses. Any opinion or other information in this e-mail or its attachments
that does not relate to the business of the GKN Group or any part of it is personal to the sender and is not given or in any way endorsed by the
GKN Group or any part of it.
GKN Aerospace Services Limited is registered in England No. 355922
Registered office: Ferry Road, East Cowes, Isle of Wight, PO32 6RA, EnglandReviewed 21st February 2007
-----------------------------------------------------------------------------------------------------------------------------------------
This email message has been scanned & delivered safely by Mimecast, for more information please visit
http://www.mimecast.co.uk
-----------------------------------------------------------------------------------------------------------------------------------------
midrange.com
