I used MPA when it first came out about 1989? Anyway, it was one of the
very first BI type tools for any ERP system. It even had graphical
reporting in green screen!
Unfortunately it has not changed since then. EBI replaces all of it.
The file is not really used by EPDM but by MM. But only if you have both
MPA and MM. I don't know if it is packaged with EPDM but I know it is
packaged with MM. EPDM disables 3 measurements when you have EPDM with MPA:
7 BOM accuracy (Go figure that it won't work with alternate BOMs!), 12 Queue
performance (Facilities overlay of Work Centers screwed it up.), and 13
Output performance (dido).
The reason for this is that all of the functionality of the cycle counting
feature in MM comes from MPA!
MPA had true cycle counting and reporting as far back as 1989 or so.
The only feature missing in the MM cycle counting is the graphical reporting
of inventory accuracy. We had to create a live reporting function using MS
Access that worked very very well. Eventually replaced by EBI.
-----Original Message-----
From: mapics-l-bounces@xxxxxxxxxxxx [mailto:mapics-l-bounces@xxxxxxxxxxxx]
On Behalf Of Mike Bennett
Sent: Wednesday, December 12, 2007 1:19 PM
To: mapics-l@xxxxxxxxxxxx
Subject: [MAPICS-L] Measurement Master
We use MPA. It's a very good tool to measure your production environment.
Infor/Mapics has not given us a better tool yet and they don't pay much
attention to the users.
Forget EIS if anyone suggests it. #1 it does not work and no one at Infor
knows why #2 if it did there are few meaningful measurements. Very
disappointed
I am curious how others measure your production plan vs. actual, past due
orders, BOM accuracy etc.
Mike Bennett
Kimray Inc
405-525-4270 mbennett@xxxxxxxxxx
-----Original Message-----
From: mapics-l-bounces@xxxxxxxxxxxx [mailto:mapics-l-bounces@xxxxxxxxxxxx]
On Behalf Of mapics-l-request@xxxxxxxxxxxx
Sent: Wednesday, December 12, 2007 2:31 PM
To: mapics-l@xxxxxxxxxxxx
Subject: MAPICS-L Digest, Vol 5, Issue 306
Send MAPICS-L mailing list submissions to
mapics-l@xxxxxxxxxxxx
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.midrange.com/mailman/listinfo/mapics-l
or, via email, send a message with subject or body 'help' to
mapics-l-request@xxxxxxxxxxxx
You can reach the person managing the list at
mapics-l-owner@xxxxxxxxxxxx
When replying, please edit your Subject line so it is more specific
than "Re: Contents of MAPICS-L digest..."
Today's Topics:
1. Re: MEASUREMENT MASTER FILE (MSRMST) (mandis-inc@xxxxxxx)
2. Re: MEASUREMENT MASTER FILE (MSRMST) (Peter Vidal)
3. Re: auto release M.O. order (Kandel, Ed)
4. Re: MEASUREMENT MASTER FILE (MSRMST) (Peter Vidal)
5. Re: MEASUREMENT MASTER FILE (MSRMST)
(DaleGindlesperger@xxxxxxxxxxx)
6. Re: MEASUREMENT MASTER FILE (MSRMST) (Peter Vidal)
7. Re: MEASUREMENT MASTER FILE (MSRMST) (Peter Vidal)
8. Re: MEASUREMENT MASTER FILE (MSRMST) (Denroxi@xxxxxxx)
----------------------------------------------------------------------
message: 1
date: Wed, 12 Dec 2007 18:33:56 +0000
from: mandis-inc@xxxxxxx
subject: Re: [MAPICS-L] MEASUREMENT MASTER FILE (MSRMST)
Might these be the tables used by the Manufacturing Performance Analysis
(MPA) module?
--
Best regards,
Mike Dreimiller
Mandis Inc.
410-526-5996
Mandis-Inc@xxxxxxx
-------------- Original message from Nick_Radich@xxxxxxxxxxxxxx:
--------------
It looks the same on mine also. It looks like it comes preloaded with the
system.
We are at XAR6.
Thanx,
Nick
Nick Radich
Sr. Programmer/Analyst
EPC Molding, Inc.
Direct (320) 679-6683
Toll free (800) 388-2155 ext. 6683
Fax (320) 679-4516
nick_radich@xxxxxxxxxxxxxx
"Tom E. Stieger"
Sent by: mapics-l-bounces@xxxxxxxxxxxx
12/12/2007 09:35 AM
Please respond to
MAPICS ERP System Discussion
To
"MAPICS ERP System Discussion"
cc
Subject
Re: [MAPICS-L] MEASUREMENT MASTER FILE (MSRMST)
I don't know what it is for or how it got there, but this is the data in
our file.
There are also other fields relating to what the values are and period
data.
Measurement Measurement Measurement
ID Name Purpose
001 CUSTOMER ORDER BOOKING PERFORMANCE MEASURE
SALES (BOOKINGS) FORECAST ACCURACY BY
002 CUSTOMER ORDER BACKLOG ANALYSIS MEASURE
THE LEVEL AND THE TREND OF PAST DUE
003 MASTER SCHEDULE PERFORMANCE MEASURE
ACTUAL BUILD PERFORMANCE COMPARED WITH
004 SHIPPING PERFORMANCE MEASURE
THE TREND AND LEVEL OF ON-TIME SHIPMENTS
005 INVENTORY PERFORMANCE PROFILE MEASURE
PLANNED INVENTORY LEVELS AGAINST ACTUAL
006 INVENTORY RECORD ACCURACY MEASURE
THE LEVEL OF INVENTORY RECORD ACCURACY FOR
007 BILL OF MATERIAL RECORD ACCURACY MEASURE
THE ACCURACY OF THE BILLS OF MATERIAL
008 PURCHASE COMMITTMENT PERFORMANCE MEASURE
ACTUAL PROCUREMENT OF PURCHASED ITEMS
009 ORDER RESCHEDULE RELIABILITY MEASURE
THE LEVEL OF PURCHASE AND MANUFACTURING
010 ORDER RELEASE RELIABILITY MEASURE
THE LEVEL OF ORDERS RELEASED WITH FULL
011 MATERIAL AVAILABILITY PERFORMANCE MEASURE
THE ACHIEVEMENT OF THE MATERIAL
012 QUEUE PERFORMANCE MEASURE
THE LEVEL AND THE TREND OF WAITING WORK
013 OUTPUT PERFORMANCE MEASURE
PRODUCTION OUTPUT PERFORMANCE TO PLANNED
014 INVENTORY TURNOVER TREND MEASURE
THE TREND OF AGGREGATE INVENTORY INVEST-
015 EXCESS INVENTORY ANALYSIS MEASURE
THE LEVEL OF AVAILABLE INVENTORY IN EXCESS
Looks like it is for some BI app.
-Tom Stieger
Engineer
California Fine Wire
805-489-5144 x235
-----Original Message-----
From: mapics-l-bounces@xxxxxxxxxxxx
[mailto:mapics-l-bounces@xxxxxxxxxxxx]On Behalf Of Peter Vidal
Sent: Tuesday, December 11, 2007 10:59 AM
To: mapics-l@xxxxxxxxxxxx
Subject: [MAPICS-L] MEASUREMENT MASTER FILE (MSRMST)
Hi List!
How I can update this file? Is this from EPDM? There is nothing
available in the INFOR Knowledge base about this.
Regards,
Peter Vidal
MAPICS IT Technical Support Team / SR System Analyst
10540 Ridge Rd., Ste 203, New Port Richey, FL 34654-5111
Tel:727-849-9999, x2414 Fax:727-815-3120
http://www.pall.com
"The time to pray is not when we are in a tight spot but just as soon as
we get out of it."
Josh Billings (1818 - 1885)
----------------------------------------------------------------------------
----
Attention:
This communication may contain information that is confidential,
privileged and/or exempt from disclosure under applicable law.
If you are not the intended recipient, please notify the sender
immediately and delete the original, all attachments, and all
copies of this communication.
----------------------------------------------------------------------------
----
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/mapics-l.
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/mapics-l.
------------------------------
message: 2
date: Wed, 12 Dec 2007 13:43:04 -0500
from: Peter Vidal <Peter_Vidal@xxxxxxxx>
subject: Re: [MAPICS-L] MEASUREMENT MASTER FILE (MSRMST)
Yes, in deed this is a file used in the Manufacturing Performance Analysis
(MPA) module. I opened an incident with INFOR so they can explain to me
what is this file about...
Peter Vidal
MAPICS IT Technical Support Team / SR System Analyst
10540 Ridge Rd., Ste 203, New Port Richey, FL 34654-5111
Tel:727-849-9999, x2414 Fax:727-815-3120
http://www.pall.com
"Labor to keep alive in your heart that little spark of celestial fire -
Conscience."
George Washington
----------------------------------------------------------------------------
----
Attention:
This communication may contain information that is confidential,
privileged and/or exempt from disclosure under applicable law.
If you are not the intended recipient, please notify the sender
immediately and delete the original, all attachments, and all
copies of this communication.
----------------------------------------------------------------------------
----
------------------------------
message: 3
date: Wed, 12 Dec 2007 14:52:51 -0500
from: "Kandel, Ed" <EKandel@xxxxxxxxxxxxxxxxxxxxx>
subject: Re: [MAPICS-L] auto release M.O. order
Looks like the component availability check is promised as a future
enhancement according to XA - No Wait Response...
"The Mfg Auto Release code on the Item Balance Planning Information
screen provides three options:
0 - Do not release
1 - Release only if all components are available (This option not
currently active - It will be activated by a future Enhancement SH)
2 - Release"
Ed Kandel
Senior Programmer/Analyst
Cone Drive, A Textron Company
Traverse City, Michigan
Phone 231 929-8218
Email ekandel@xxxxxxxxxxxxxxxxxxxxx
www.conedrive.com
-----Original Message-----
From: DaleGindlesperger@xxxxxxxxxxx
[mailto:DaleGindlesperger@xxxxxxxxxxx]
Sent: Wednesday, December 12, 2007 10:36 AM
To: MAPICS ERP System Discussion
Subject: Re: [MAPICS-L] auto release M.O. order
Arno, I'd like to see that work also!!! We currently do exactly what
you
do (except we run MRP 2x a week, not daily). And it is VERY
time-consuming.
Dale Gindlesperger
IT Manager/Special Projects Leader
Fleetwood Folding Trailers, Inc.
258 Beacon Street
Somerset, PA 15501
"Arno de Bliek"
<adbliek@timesave
rsint.com>
To
Sent by: "MAPICS ERP System Discussion"
mapics-l-bounces+ <mapics-l@xxxxxxxxxxxx>
dalegindlesperger
cc
=fft-inc.com@midr
ange.com
Subject
[MAPICS-L] auto release M.O.
order
12/12/2007 07:52
AM
Please respond to
MAPICS ERP System
Discussion
<mapics-l@midrang
e.com>
Hello Group,
Every day after running MRP we release manufacturing orders manually.
Work
sequence is as follows. We request a exception report. Check item by
item
for required material. Next step is review and aprove item by item. We
only
want to release orders if the required material is available. You can
imagine that this is very time consuming. Maybe we should try MRP menu
"Check item Availability Prior to Release".
We use Mapics XA release 6, with browser. We have a controlled
warehouse.
Solution:
Looking at field "Manufacture auto release code", you can set this on
position 1. Setting "1=Auto release M.O. if all components are
available".
My expectation is that orders will be automaticaly released when all
needed
components are there, but it doesn't seem to work.
Any suggestions?? You cannot find the above descibed functionality in
the
manual (at least I didn't).
regards,
Arno de Bliek
Timesavers International B.V.
Netherlands
0031-113238969
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
http://archive.midrange.com/mapics-l.
------------------------------
message: 4
date: Wed, 12 Dec 2007 15:01:46 -0500
from: Peter Vidal <Peter_Vidal@xxxxxxxx>
subject: Re: [MAPICS-L] MEASUREMENT MASTER FILE (MSRMST)
Well, bad luck for me. Due to the fact that none of our locations use
the Manufacturing Performance Analysis (MPA) module they cannot give me
more information other than saying that this file is in use by this
application. No explanations were given to me even about the fact that
the file was in use by EPDM and how is used there...
Is incredible.
Thanks all anyway for your help.
Peter Vidal
MAPICS IT Technical Support Team / SR System Analyst
10540 Ridge Rd., Ste 203, New Port Richey, FL 34654-5111
Tel:727-849-9999, x2414 Fax:727-815-3120
http://www.pall.com
"Players win games, teams win championships."Bill Taylor
----------------------------------------------------------------------------
----
Attention:
This communication may contain information that is confidential,
privileged and/or exempt from disclosure under applicable law.
If you are not the intended recipient, please notify the sender
immediately and delete the original, all attachments, and all
copies of this communication.
----------------------------------------------------------------------------
----
------------------------------
message: 5
date: Wed, 12 Dec 2007 15:27:45 -0500
from: DaleGindlesperger@xxxxxxxxxxx
subject: Re: [MAPICS-L] MEASUREMENT MASTER FILE (MSRMST)
Wait.... because you don't have the application installed, they won't
answer any technical questions?
Dale Gindlesperger
IT Manager/Special Projects Leader
Fleetwood Folding Trailers, Inc.
258 Beacon Street
Somerset, PA 15501
Peter Vidal
<Peter_Vidal@pall
.com> To
Sent by: MAPICS ERP System Discussion
mapics-l-bounces@ <mapics-l@xxxxxxxxxxxx>
midrange.com cc
Subject
12/12/2007 03:01 Re: [MAPICS-L] MEASUREMENT MASTER
PM FILE (MSRMST)
Please respond to
MAPICS ERP System
Discussion
<mapics-l@midrang
e.com>
Well, bad luck for me. Due to the fact that none of our locations use
the Manufacturing Performance Analysis (MPA) module they cannot give me
more information other than saying that this file is in use by this
application. No explanations were given to me even about the fact that
the file was in use by EPDM and how is used there...
Is incredible.
Thanks all anyway for your help.
Peter Vidal
MAPICS IT Technical Support Team / SR System Analyst
10540 Ridge Rd., Ste 203, New Port Richey, FL 34654-5111
Tel:727-849-9999, x2414 Fax:727-815-3120
http://www.pall.com
"Players win games, teams win championships."Bill Taylor
----------------------------------------------------------------------------
----
Attention:
This communication may contain information that is confidential,
privileged and/or exempt from disclosure under applicable law.
If you are not the intended recipient, please notify the sender
immediately and delete the original, all attachments, and all
copies of this communication.
----------------------------------------------------------------------------
----
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
http://archive.midrange.com/mapics-l.
------------------------------
message: 6
date: Wed, 12 Dec 2007 15:26:54 -0500
from: Peter Vidal <Peter_Vidal@xxxxxxxx>
subject: Re: [MAPICS-L] MEASUREMENT MASTER FILE (MSRMST)
"Wait.... because you don't have the application installed, they won't
answer any technical questions?
Dale, that is a true statement. I am not sure if it is just that the lady
is having a bad day or what but is the first time in my whole 15 years of
experience using MAPICS that somebody in tech support answers me like
that.
Again, I am stunned for this.
Peter Vidal
MAPICS IT Technical Support Team / SR System Analyst
10540 Ridge Rd., Ste 203, New Port Richey, FL 34654-5111
Tel:727-849-9999, x2414 Fax:727-815-3120
http://www.pall.com
"I not only use all the brains that I have, but all that I can borrow."
Woodrow Wilson (1856-1924)
----------------------------------------------------------------------------
----
Attention:
This communication may contain information that is confidential,
privileged and/or exempt from disclosure under applicable law.
If you are not the intended recipient, please notify the sender
immediately and delete the original, all attachments, and all
copies of this communication.
----------------------------------------------------------------------------
----
------------------------------
message: 7
date: Wed, 12 Dec 2007 15:28:10 -0500
from: Peter Vidal <Peter_Vidal@xxxxxxxx>
subject: Re: [MAPICS-L] MEASUREMENT MASTER FILE (MSRMST)
I replied and expressed how poor customer service was during the
development of this incident, and guessed what...
The incident is already closed!
Peter Vidal
MAPICS IT Technical Support Team / SR System Analyst
10540 Ridge Rd., Ste 203, New Port Richey, FL 34654-5111
Tel:727-849-9999, x2414 Fax:727-815-3120
http://www.pall.com
"I not only use all the brains that I have, but all that I can borrow."
Woodrow Wilson (1856-1924)
----------------------------------------------------------------------------
----
Attention:
This communication may contain information that is confidential,
privileged and/or exempt from disclosure under applicable law.
If you are not the intended recipient, please notify the sender
immediately and delete the original, all attachments, and all
copies of this communication.
----------------------------------------------------------------------------
----
------------------------------
message: 8
date: Wed, 12 Dec 2007 15:33:30 EST
from: Denroxi@xxxxxxx
subject: Re: [MAPICS-L] MEASUREMENT MASTER FILE (MSRMST)
In a message dated 12/12/2007 5:25:00 P.M. Pacific SA Daylight Time,
DaleGindlesperger@xxxxxxxxxxx writes:
Wait.... because you don't have the application installed, they won't
answer any technical questions?
Dale Gindlesperger
IT Manager/Special Projects Leader
Fleetwood Folding Trailers, Inc.
258 Beacon Street
Somerset, PA 15501
Peter Vidal
<Peter_Vidal@pall
.com> To
Sent by: MAPICS ERP System Discussion
mapics-l-bounces@ <mapics-l@xxxxxxxxxxxx>
midrange.com cc
Subject
12/12/2007 03:01 Re: [MAPICS-L] MEASUREMENT MASTER
PM FILE (MSRMST)
Please respond to
MAPICS ERP System
Discussion
<mapics-l@midrang
e.com>
Well, bad luck for me. Due to the fact that none of our locations use
the Manufacturing Performance Analysis (MPA) module they cannot give me
more information other than saying that this file is in use by this
application. No explanations were given to me even about the fact that
the file was in use by EPDM and how is used there...
Is incredible.
Thanks all anyway for your help.
Peter Vidal
MAPICS IT Technical Support Team / SR System Analyst
10540 Ridge Rd., Ste 203, New Port Richey, FL 34654-5111
Tel:727-849-9999, x2414 Fax:727-815-3120
http://www.pall.com
"Players win games, teams win championships."Bill Taylor
----------------------------------------------------------------------------
--
--
Attention:
This communication may contain information that is confidential,
privileged and/or exempt from disclosure under applicable law.
If you are not the intended recipient, please notify the sender
immediately and delete the original, all attachments, and all
copies of this communication.
----------------------------------------------------------------------------
--
--
welcome to INFOR. I have insight think of a world wide multi billion$ firm
in indiana is ready to switch to SAP @ all locals due in part to the INFOR
marketing technique + sales shorts in programming. Anybody can make anything
in
China. They world does not need INFOR, but INFOR is not of this world. Hope
INFOR was not an IPO or hostile takeover,,,,,mortgages are in danger....
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
http://archive.midrange.com/mapics-l.
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
http://archive.midrange.com/mapics-l.
Dennis Guy Vaillant
DenRox Inc.
**************************************See AOL's top rated recipes
(
http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004)
------------------------------
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) digest list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
http://archive.midrange.com/mapics-l.
End of MAPICS-L Digest, Vol 5, Issue 306
****************************************
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
http://archive.midrange.com/mapics-l.
midrange.com
