From the Support site...
Here is the solution: EAM7441 Item status not equal to location
status.
Put the material in a location which has the same QC status. The
Location by item inquiry (AMIM10 option 8) will show the status of all
locations/lots for an item in a warehouse. A query of SLQNTY can show
if there is an invalid QC status. There are 2 QC status indicators.
Valid status codes are:
1 / 0 = QC item - within shelf life, inspection not yet
required.
2 / 0 = Item not QC controlled. Does not require inspection.
8 / 0 = Item has been rejected.
******* 9 / 0 = Waiting inspect on receipt - Purchased
item.*******
******* 1 / 7 = Waiting inspect on receipt - Manufactured
item.*******
1 / 9 = QC item - shelf life expired, QC inspection due
-----Original Message-----
From: mapics-l-bounces@xxxxxxxxxxxx
[mailto:mapics-l-bounces@xxxxxxxxxxxx] On Behalf Of Lloyd Degnon
Sent: Friday, August 24, 2007 10:44 AM
To: MAPICS ERP System Discussion
Subject: Re: [MAPICS-L] item status mismatch...
We get that silly error message sometimes when are trying to receive
product to dock, but it was already ready rec'd and is stuck in the
inspection location.
-----Original Message-----
From: mapics-l-bounces@xxxxxxxxxxxx
[mailto:mapics-l-bounces@xxxxxxxxxxxx] On Behalf Of Charley Simpson
Sent: Friday, August 24, 2007 10:00 AM
To: MAPICS ERP System Discussion
Subject: [MAPICS-L] item status mismatch...
R6
Howdy.
Sorry to bother this busy group with what is most likely a very basic
question, but after researching, I am stumped (not a difficult feat!).
I created a new warehouse (MRB) to hold suspect goods until they are
cleared. It is controlled, as is our main warehouse.
When I try to TW from the main warehouse to the MRB warehouse I get an
error: 'item status not equal to location status'
The item has the "Inspect On Receipt" flag set to yes and the "Quality"
flag set to no.
I have looked everywhere I know as well as searched the K-base. Man, I
hope it's not a PTF!!!
TIA!
Charley
Charley Simpson, CPIM
Director of Operations
805-426-3410
www.turboneticsinc.com <
http://www.turboneticsinc.com/>
*** Please note that the information contained in this message may be
privileged and confidential and protected from disclosure. If the
reader of this message is not the intended recipient, or an employee or
agent responsible for delivering this message to the intended recipient,
you are hereby notified that any dissemination, distribution or copying
of this communication is strictly prohibited. If you have received this
communication in error, please notify us by replying to the message and
deleting it from your computer. Thank you. Turbonetics, Inc. ***
midrange.com
