|
midrange.com
As much good advice as you give on this thread, I would hope your
presentation is accepted!
Dale Gindlesperger
IT Manager/Special Projects Leader
Fleetwood Folding Trailers, Inc.
258 Beacon Street
Somerset, PA 15501
"Walker, Dale"
<DWalker@automaticpr To: "MAPICS ERP System
Discussion" <mapics-l@xxxxxxxxxxxx>
oducts.com> cc:
Sent by: Subject: RE: Printing
AutoCad Drawings With MO
mapics-l-bounces@mid
range.com
01/27/2004 04:21 PM
Please respond to
MAPICS ERP System
Discussion
Dale - I don't drink beer...unless I am either alone or with someone.
:-)
The budget is tight so I don't know if I am attending the '04 conference
or not. I did respond to the call for papers so if they accept my pitch
I can go for free.
Dale Walker.
-----Original Message-----
From: DaleGindlesperger@xxxxxxxxxxx
[mailto:DaleGindlesperger@xxxxxxxxxxx]
Sent: Tuesday, January 27, 2004 2:41 PM
To: MAPICS ERP System Discussion
Subject: RE: Printing AutoCad Drawings With MO
Dale, that's a good idea! I've done that elsewhere, but never thought
about it for this application.
If you go to the MUC this year, I owe you a beer for that one!
Dale Gindlesperger
IT Manager/Special Projects Leader
Fleetwood Folding Trailers, Inc.
258 Beacon Street
Somerset, PA 15501
"Walker, Dale"
<DWalker@automaticpr To: "MAPICS ERP
System Discussion" <mapics-l@xxxxxxxxxxxx>
oducts.com> cc:
Sent by: Subject: RE: Printing
AutoCad Drawings With MO
mapics-l-bounces@mid
range.com
01/27/2004 02:51 PM
Please respond to
MAPICS ERP System
Discussion
Dale,
Here is an idea on your shop packet & blueprint print issue. Take
control away from the RPG cycle and open and close the print file for
the shop packets with each order. Open the prtf, spool the shop packet,
close the file, and issue the remote command call, put a delay in if you
need to in order to allow the drawing to completely spool up, then
reopen the prtf and continue with the next shop packet, etc.
Good Luck.
Dale Walker
-----Original Message-----
From: DaleGindlesperger@xxxxxxxxxxx
[mailto:DaleGindlesperger@xxxxxxxxxxx]
Sent: Tuesday, January 27, 2004 1:22 PM
To: MAPICS ERP System Discussion
Subject: Re: Printing AutoCad Drawings With MO
This is on my "to-do list" also. My current plan is to modify the shop
packet print program(s) AMI4H and AMI4I to add a call to execute a PC
print
command through the Client Access RUNRMTCMD utility to print the
blueprints. The problem is that the blue prints will not be in sequence
with the shop packets, they will print after all the shop packets. If
we
only released one order at a time, that would work, but we don't do
that.
I'd love to know how to have them print with the shop packets, in
sequence.
Dale Gindlesperger
IT Manager/Special Projects Leader
Fleetwood Folding Trailers, Inc.
258 Beacon Street
Somerset, PA 15501
"Morrison, Doug"
<dmorrison@simonds To:
<MAPICS-L@xxxxxxxxxxxx>
int.com> cc: "Sargent,
Daniel" <dsargent@xxxxxxxxxxxxxx>
Sent by: Subject: Printing
AutoCad Drawings With MO
mapics-l-bounces@m
idrange.com
01/27/2004 12:41
PM
Please respond to
MAPICS ERP System
Discussion
We are running MAPICS XA Rel 6 including browser on an AS/400. Our
manufacturing department has requested that we automate the printing of
AutoCad drawings with the printing our MAPICS MO's.
Has anyone integrated the printing of drawings with their MO printing?
Or have any recommendation on how to accomplish this task?
Thanks in advance for your input.
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/mapics-l.
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/mapics-l.
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/mapics-l.
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/mapics-l.
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/mapics-l.
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
