|
Hi Kurt, Unfortunately, I'm running V3R2 due to the fact that I'm on a CISC box, and IBM doesn't like me. :) If there is a PTF for V3R2, I've probably already got it on tape (I ordered everything I could find back in May before they stopped making them for V3R2... though I havent gotten around to installing them yet) but you didn't list one... At any rate, I highly doubt that this is an AS/400 problem, since I'm only having it with the lp5250d program thats distributed with this tn5250 package, and not with RUMBA 2000 (also over TN5250e) or with a direct lpr request from the AS/400 to the UNIX box. In other words, if its a problem with the TN5250 server on the AS/400, why isn't it also happening with RUMBA 2000 using TN5250e? Thanks for the reply... On Tue, 13 Jun 2000 kschroe@us.ibm.com wrote: > I had a customer with that same problem recently and he applied the latest > TCP/IP Print Session Enhancement PTFS and he hasn't had a recurrance. > > V4RxMx TCP/IP PC5250 Printer Session Fixes for OS/400 - Current as of > 05/31/2000 > > The following PTFs are general fixes for configuring PC5250 Printer Session > over TCP/IP protocol: > |---------+--------------+--------------+---------------+----------------| > | |R410 (5769) |R420 (5769) |R430 (5769) |R440(5769) | > |---------+--------------+--------------+---------------+----------------| > |57xxTC1 |SF60365 (1000)|SF60530 (1000)|SF60463 (0077) |SF61175 (0147) | > |---------+--------------+--------------+---------------+----------------| > |57xx999 |MF23706 (1000)|MF23982 (1000)|MF24191 (1000) |MF24192 (0147) | > |---------+--------------+--------------+---------------+----------------| > |57xxSS1 |SF52402 (1000)|SF59303 (1000)|SF62651 (0077) |SF62653 (1000) | > |---------+--------------+--------------+---------------+----------------| > |57xxSS1 | |SF47792 (1000)|SF52102 (9131) | | > |---------+--------------+--------------+---------------+----------------| > |57xxSS1 | |SF48804 (1000)| | | > |---------+--------------+--------------+---------------+----------------| > |57xxSS1 | |SF47400 (8265)| | | > |---------+--------------+--------------+---------------+----------------| > |57xxSS1 | |SF51355 (9068)| | | > |---------+--------------+--------------+---------------+----------------| > > Remember to read the cover letters for them. Some have "Enhancements" that > must be performed before/after PTF load. > ____________________________________ > Kurt Schroeder AS/400 SupportLine Print > phone: T/L 8-456-6177 or 507-286-6177 > fax: T/L 8-456-6221 or 507-253-6221 > e-mail: kschroe@us.ibm.com > > Scott Klement <klemscot@klements.com> on 06-13-2000 02:38:54 PM > > Please respond to LINUX5250@midrange.com > > To: linux5250@midrange.com > cc: > Subject: (lp5250d) SNA Protocol Error? > > I've created a scenario where a document is generated on the AS/400 using > different size fonts, graphics, etc. the print file is set up as an *AFPDS > type, if that matters. > > Of course, I'm using Host Print Transform to convert the data to my > printer's language, and lp5250d as a transport to get it to from the > AS/400 to the PC. > > Okay, here's the problem... > > When I print this document the first time, it works great. But the 2nd > one causes the AS/400 to say that the print writer ended abnormally. > > The job log states: > > Message . . . . : Error on device PI. Device response code is 6136. > Cause . . . . . : SNA protocol error. There is a probable device > error. > Recovery . . . : Device response codes and their meanings follow: > 80040000-Incorrect device address. 20040000-Direction error. > 08130000-Bracket bid not supported. 6130-Incorrect data received. > 6150-Partial chain received. 6136-Unexpected response received. > 6138-System cannot obtain send state. Close the file QPSPLPRT in QSYS > and try the request again. If the error occurs again, enter the ANZPRB > command to run problem analysis. > > If I end and restart lp5250d, It does the same thing -- works for the > first spool file, the 2nd one causes it to end with this error again. > > I tried the same thing with both LPR/LPD (directly from the AS/400 to > the UNIX box) and with RUMBA under Windows, and did not have any problems, > so its not the document. > > Any ideas? Want a tracefile? > > -Scott +--- | This is the LINUX5250 Mailing List! | To submit a new message, send your mail to LINUX5250@midrange.com. | To subscribe to this list send email to LINUX5250-SUB@midrange.com. | To unsubscribe from this list send email to LINUX5250-UNSUB@midrange.com. | Questions should be directed to the list owner/operator: david@midrange.com +---
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
midrange.com
