Re: (lp5250d) SNA Protocol Error?

[kschroe@xxxxxxxxxx]

I had a customer with that same problem recently and he applied the latest
TCP/IP Print Session Enhancement PTFS and he hasn't had a recurrance.

V4RxMx TCP/IP PC5250 Printer Session Fixes for OS/400 - Current as of
05/31/2000

The following PTFs are general fixes for configuring PC5250 Printer Session
over TCP/IP protocol:
|---------+--------------+--------------+---------------+----------------|
|         |R410 (5769)   |R420 (5769)   |R430 (5769)    |R440(5769)      |
|---------+--------------+--------------+---------------+----------------|
|57xxTC1  |SF60365 (1000)|SF60530 (1000)|SF60463 (0077) |SF61175 (0147)  |
|---------+--------------+--------------+---------------+----------------|
|57xx999  |MF23706 (1000)|MF23982 (1000)|MF24191 (1000) |MF24192 (0147)  |
|---------+--------------+--------------+---------------+----------------|
|57xxSS1  |SF52402 (1000)|SF59303 (1000)|SF62651 (0077) |SF62653 (1000)  |
|---------+--------------+--------------+---------------+----------------|
|57xxSS1  |              |SF47792 (1000)|SF52102 (9131) |                |
|---------+--------------+--------------+---------------+----------------|
|57xxSS1  |              |SF48804 (1000)|               |                |
|---------+--------------+--------------+---------------+----------------|
|57xxSS1  |              |SF47400 (8265)|               |                |
|---------+--------------+--------------+---------------+----------------|
|57xxSS1  |              |SF51355 (9068)|               |                |
|---------+--------------+--------------+---------------+----------------|




Remember to read the cover letters for them. Some have "Enhancements" that
must be performed before/after PTF load.
____________________________________
Kurt Schroeder  AS/400 SupportLine Print
phone: T/L 8-456-6177 or 507-286-6177
fax:        T/L 8-456-6221 or 507-253-6221
e-mail: kschroe@us.ibm.com




Scott Klement <klemscot@klements.com> on 06-13-2000 02:38:54 PM

Please respond to LINUX5250@midrange.com

To:   linux5250@midrange.com
cc:
Subject:  (lp5250d) SNA Protocol Error?





I've created a scenario where a document is generated on the AS/400 using
different size fonts, graphics, etc. the print file is set up as an *AFPDS
type, if that matters.

Of course, I'm using Host Print Transform to convert the data to my
printer's language, and lp5250d as a transport to get it to from the
AS/400 to the PC.

Okay, here's the problem...

When I print this document the first time, it works great.   But the 2nd
one causes the AS/400 to say that the print writer ended abnormally.

The job log states:

 Message . . . . :   Error on device PI.  Device response code is 6136.
 Cause . . . . . :   SNA protocol error.  There is a probable device
error.
   Recovery  . . . :   Device response codes and their meanings follow:
   80040000-Incorrect device address. 20040000-Direction error.
   08130000-Bracket bid not supported. 6130-Incorrect data received.
   6150-Partial chain received. 6136-Unexpected response received.
   6138-System cannot obtain send state. Close the file QPSPLPRT in QSYS
   and try the request again. If the error occurs again, enter the ANZPRB
   command to run problem analysis.

If I end and restart lp5250d, It does the same thing -- works for the
first spool file, the 2nd one causes it to end with this error again.

I tried the same thing with both LPR/LPD (directly from the AS/400 to
the UNIX box) and with RUMBA under Windows, and did not have any problems,
so its not the document.

Any ideas?   Want a tracefile?

-Scott


+---
| This is the LINUX5250 Mailing List!
| To submit a new message, send your mail to LINUX5250@midrange.com.
| To subscribe to this list send email to LINUX5250-SUB@midrange.com.
| To unsubscribe from this list send email to LINUX5250-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---



+---
| This is the LINUX5250 Mailing List!
| To submit a new message, send your mail to LINUX5250@midrange.com.
| To subscribe to this list send email to LINUX5250-SUB@midrange.com.
| To unsubscribe from this list send email to LINUX5250-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---