× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  1.  Home
  2. JAVA400-L
  3. January 2000

RE: WebSphere Question

  • Subject: RE: WebSphere Question
  • From: "Jaladi Ravi Kiran, Gurgaon" <jaladirk@xxxxxxxxxxxxxxx>
  • Date: Tue, 18 Jan 2000 16:26:38 +0530
 
Hi luther/Richard,

        Yes, that's only a typo mistake, I believe we've applied the Web
Server and WS Application Server PTF's ( SF99026 & 27) but not the SF98440 &
SF99095, but we've loaded latest cum PTF immed after we shifted to V4R4. Is
there any way so that we can check these PTF's are available or not ? any
other way than DSPPTF.

        Here am using my own Configuration file for this Web Sphere Server ,
and My jvm.properties file points to this Configuration file instead of
CONFIG.MBR.

        Once I start my Webserver my server job sits in CNDW status. But, if
I start my DEFAULT instance before my Web Server instance then My Web server
job sits in SIGW status for a while and then shut downs automatically.

        When I test my WebSpehre Server using the URL:
http://yourServer:xxxx/servlet/HelloWorldServlet> from my IE 5 browser , I
get the following error ( as I mentioned earlier).

The page cannot be found The page you are looking for might have been
removed, had its name changed, or is temporarily unavailable. 

Please try the following:
*       If you typed the page address in the Address bar, make sure that it
is spelled correctly.
*       Open the myas400.9090  <http://s102k9nm:9090>  home page, and then
look for links to the information you want. 
*       Click the javascript:history.back(1) <javascript:history.back(1)>
Back <javascript:history.back(1)>  button to try another link. 
*       Click Error! Hyperlink reference not valid.Error! Hyperlink
reference not valid. to look for information on the Internet. 
HTTP 404 - File not found
Internet Explorer 
***********************************************

Regards
Ravi





        -----Original Message-----
        From:   Luther Ananda Miller [SMTP:luther.miller@HYPERE.COM]
        Sent:   Friday, January 14, 2000 6:12 PM
        To:     JAVA400-L@midrange.com
        Subject:        Re: WebSphere Question

        In line 50, there is an extra "e" in "AdapteerInit" -- could that be
the
        problem, or is that just a typo when you copied the file to send as
email?

        Does your jvm.properties file have something like this:
        
ncf.native.httpd.cnf.path=/QSYS.LIB/QUSRSYS.LIB/QATMHTTPC.FILE/CONFIG.MBR
        ?

        Do you have the most recent WebSphere-related Group PTF(s)?
        * SF99026: 440 WebServer Group PTF
        * SF99027: 440 Websphere Application Server
        * SF99067: - R440 JAVA Group PTF Description: Java Fixes
        SF98440: Current Cumulative PTF Package 09/13/99 03:17 PM
        SF99095: 440 Hipers

        After you start WebSphere, do WRKACTJOB -- wait state is the server
in and
        what states does it change to? Does it stay up or shut down? Check
the logs
        in the subdirectories under /qibm/proddata/ibmwebas/logs

        hope that helps..

        Luther

        ----- Original Message -----
        From: Jaladi Ravi Kiran, Gurgaon <jaladirk@ggn.hcltech.com>
        To: <JAVA400-L@midrange.com>
        Sent: Friday, 14 January 2000 13:07
        Subject: RE: WebSphere Question


        > Thankyou...thankyou... Mr. Richard/Graeme for jumping in and try
to help
        me
        > to over come this problem.
        >
        > Yes ! the WebSphere is running and I had done the same thing what
you
        > (graeme) have described and I had the same experience, so, I
enabled the
        > "JavaServer Pages" and "URL invocation"  from my HTTP server pages
(i.e.
        > http://your400:2001 <http://your400:2001> ) and the same line was
inserted
        ,
        > what you mentioned i.e......./bootstrap.properties.
        >
        > Only after this I was able to get into my http://your400:9090
        > <http://your400:2001>  (if I remember correctly ) we tried all the
        options,
        > but we're not successful in testing our WAS by running the
following i.e:
        > http://yourServer:xxxx/servlet/HelloWorldServlet
        > <http://yourServer:xxxx/servlet/HelloWorldServlet> .
        >
        > Still any help is greatly appreciated .
        >
        > Am sending my CFG file for your Concerns .
        >  <<htpcfg.txt>>
        >
        > THANKYOU  VERY MUCH.
        > RAVI.
        >
        >
        > -----Original Message-----
        > From: Richard Dean [SMTP:rddean@gdi.net]
        > Sent: Thursday, January 13, 2000 8:34 PM
        > To: JAVA400-L@midrange.com
        > Subject: RE: WebSphere Question
        >
        > Hi Ravi,
        >
        > Did you ever get your WebSphere going?  I noticed from your post
        > that we had
        > similar problems.  I got mine going, and I want to see if I could
        > help you
        > if you guys are still having problems.
        >
        > Richard Dean
        >
        >
        > -----Original Message-----
        > From: owner-java400-l@midrange.com
        > [mailto:owner-java400-l@midrange.com]On Behalf Of Jaladi Ravi
Kiran,
        > Gurgaon
        > Sent: Monday, January 03, 2000 3:59 AM
        > To: JAVA400-L@midrange.com
        > Subject: RE: WebSphere Question
        >
        >
        > Hi soni,
        >
        > This's with respect to the same question we've raised. We're
        > following the
        > steps given in http://www.as400.ibm.com/websphere
        > <http://www.as400.ibm.com/websphere>
        > For IBM WebSphere Application server getting started V4R4.
        >
        > But here we're unable to complete the Step5 . For implementing
this
        > websphere application server apart from the ADMIN and DEFAULT
        > instances and
        > the associated configuration files ADMIN and CONFIG respe...which
        > comes by
        > default with the product, we've created a  separate instance and
        > configuration for this implementation(websp).
        >
        > As you said, all the instances (ADMIN,DEFAULT & WEBSP in my case)
        > are
        > started once you start the HTTP server, but the DEFAULT  sits in
        > CNDW and
        > WEBSP sits in SIGW status. In order to get the status of WEBSP to
        > CNDW
        > either I'll have to end the DEFAULT instance or Start the  WEBSP
        > first than
        > the DEFAULT which ultimately sits in the SIGW status.
        >
        > In this, the instance which sits in the SIGW status will be there
        > for  few
        > minutes and than the job gets ended automatically.
        >
        > In which ever way  I follow , I never succeeded in completing the
        > STEP:5  as given in the mentioned site.
        >
        >
        > We're going through the FAQ's as per your suggestion and will get
        > back to
        > you with the developments. Before that, we expect your concerns
on
        > this.
        >
        > Regards
        > Ravi
        >
        > -----Original Message-----
        > From: niranjan soni [SMTP:niranjan_soni@hotmail.com]
        > Sent: Friday, December 31, 1999 5:07 PM
        > To: JAVA400-L@midrange.com
        > Subject: Re: WebSphere Question
        >
        > Hi Richard
        >
        > I guess u have got things some bit wrong over here.As far
        > the
        > instances
        > under Qhttpsvr are concerned, there are actually two
        > instances one
        > is ADMIN
        > and other one is DEFAULT, if u do not create a new server
        > instance.
        > The
        > default instance of is associated with CONFIG file(the Http
        > Configuration
        > file which is shipped with the AS400) and ur jvm.properties
        > file for
        >
        > Websphere application server points to this CONFIG file.
        > So when the AS400 starts up it brings up all the instances
        > under
        > Qhttpsvr.
        > Now if add websphere support to CONFIG.MBR file and
        > associate two
        > different
        > server instances to the same CONFIG file, then when HTTP
        > start, it
        > will try
        > to bring up both the instances which in ur case are CONFIG
        > and
        > DEFAULT.But
        > as we know there is only one Http Server instance under
        > which the
        > Websphere
        > Application server can run, so it has to be either CONFIG or
        > DEFAULT.
        > If u do WRKACTJOB SBS(QHTTPSVR), u would see ur CONFIG
        > server
        > instance's
        > status at CNDW and ur DEFAULT server instance at SIGW which
        > means
        > that the
        > Websphere is running under ur CONFIG server instance.
        >
        > Hope it answers ur queries.
        > Niranjan
        >
        >
        > >From: "Richard Dean" <rddean@gdi.net>
        > >Reply-To: JAVA400-L@midrange.com
        > >To: <JAVA400-L@midrange.com>
        > >Subject: WebSphere Question
        > >Date: Wed, 29 Dec 1999 17:25:05 -0500
        > >
        > >So we got WebSphere 1.1 going on our AS/400 running V4R4M0
        > of the
        > O/S(I
        > >know
        > >there is a version 2.02, but we have not gotten it yet).
        > Anyway we
        > have
        > >gotten to the point where the HelloWorldServlet will come
        > up.  I
        > began
        > >looking around in the Active Jobs and I noticed that we
        > have 3
        > server
        > >instances running under QHTTPSVR.  One is "Admin" which I
        > understand, the
        > >other is "Config" and "Default".  I have set "Config" up to
        > point
        > to a
        > >sample web page, I have also configured it for WebSphere.
        > This
        > seems to be
        > >working, at least according to the "Hello World" servlet
        > test.  I
        > am a
        > >little confused at what the "Default" instance is doing.  I
        > noticed
        > that if
        > >I do a ENDTCPSVR on Default, then I can no longer pull up
        > my sample
        > web
        > >page
        > >or the "HelloWorld" servlet.  I thought since I configured
        > the
        > "Config"
        > >instance, that the only thing that would be needed running
        > would be
        > the
        > >"Config" instance, but it does not seem to be working that
        > way.
        > When I
        > >restart the "Default" instance(while the "Config" instance
        > is still
        > >running), everything starts working again?  It is not a big
        > deal to
        > me if
        > >they both need to be running in order for things to work, I
        > was
        > just
        > >wondering if there was a reason or if I have something set
        > up
        > wrong?
        > >
        > >
        > >Thanks,
        > >Richard
        > >
        > >+---
        > >| This is the JAVA/400 Mailing List!
        > >| To submit a new message, send your mail to
        > JAVA400-L@midrange.com.
        > >| To subscribe to this list send email to
        > JAVA400-L-SUB@midrange.com.
        > >| To unsubscribe from this list send email to
        > JAVA400-L-UNSUB@midrange.com.
        > >| Questions should be directed to the list owner:
        > joe@zappie.net
        > >+---
        >
        > ______________________________________________________
        > Get Your Private, Free Email at http://www.hotmail.com
        >
        > +---
        > | This is the JAVA/400 Mailing List!
        > | To submit a new message, send your mail to
        > JAVA400-L@midrange.com.
        > | To subscribe to this list send email to
        > JAVA400-L-SUB@midrange.com.
        > | To unsubscribe from this list send email to
        > JAVA400-L-UNSUB@midrange.com.
        > | Questions should be directed to the list owner:
        > joe@zappie.net
        > +---
        > +---
        > | This is the JAVA/400 Mailing List!
        > | To submit a new message, send your mail to
JAVA400-L@midrange.com.
        > | To subscribe to this list send email to
        > JAVA400-L-SUB@midrange.com.
        > | To unsubscribe from this list send email to
        > JAVA400-L-UNSUB@midrange.com.
        > | Questions should be directed to the list owner: joe@zappie.net
        > +---
        >
        > +---
        > | This is the JAVA/400 Mailing List!
        > | To submit a new message, send your mail to
JAVA400-L@midrange.com.
        > | To subscribe to this list send email to
        > JAVA400-L-SUB@midrange.com.
        > | To unsubscribe from this list send email to
        > JAVA400-L-UNSUB@midrange.com.
        > | Questions should be directed to the list owner: joe@zappie.net
        > +---
        >

        +---
        | This is the JAVA/400 Mailing List!
        | To submit a new message, send your mail to JAVA400-L@midrange.com.
        | To subscribe to this list send email to
JAVA400-L-SUB@midrange.com.
        | To unsubscribe from this list send email to
JAVA400-L-UNSUB@midrange.com.
        | Questions should be directed to the list owner: joe@zappie.net
        +---
+---
| This is the JAVA/400 Mailing List!
| To submit a new message, send your mail to JAVA400-L@midrange.com.
| To subscribe to this list send email to JAVA400-L-SUB@midrange.com.
| To unsubscribe from this list send email to JAVA400-L-UNSUB@midrange.com.
| Questions should be directed to the list owner: joe@zappie.net
+---

As an Amazon Associate we earn from qualifying purchases.

This thread ...
Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2025 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.