× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  1.  Home
  2. DOMINO400
  3. January 2004

Re: Trend Micro With Domino 6.5





Here is the information that we just received:


-----Original Message-----
From: Rolf Rennemo (PM-NO)
Sent: Wednesday, January 21, 2004 1:05 PM
To: Vince Kearns (SAL-US)
Cc: Richard Ku (PGM-US)
Subject: RE: SMLN 2.6 for iSeries beta



We're ready for endorsement meeting. JM will call this for Friday or
early next week.
I'll send you a mail once we have the GM build endorsed and available.

Best regards
Rolf

-----Original Message-----
From: Vince Kearns (SAL-US)
Sent: 21. januar 2004 19:59
To: Rolf Rennemo (PM-NO)
Cc: Richard Ku (PGM-US)
Subject: RE: SMLN 2.6 for iSeries beta




Has this been released?  AGain, my customer is all over us to get
this...

Vince

-----Original Message-----
From: Rolf Rennemo (PM-NO)
Sent: Friday, December 19, 2003 12:48 PM
To: Vince Kearns (SAL-US)
Cc: Richard Ku (PGM-US)
Subject: RE: SMLN 2.6 for iSeries beta



We will release SMLN 2.6 for AS400 initially without eManager. GM first
half of January. We plan to add eManager in a .x release later - 1H
2004.

Best regards
Rolf

Thanks,

Dave Guerrero
e-Business Solutions Manager
--------------------------------------------------------------------
Computech Resources, Inc.
1375 W. Main Avenue
De Pere, WI 54115
Web:  http://www.compures.com
--------------------------------------------------------------------
Phone:  920-336-1387 Ext. 264
Cell:  920-360-7225
Fax:  920-336-7728
e-Mail:  dguerrero@xxxxxxxxxxxx



domino400-bounces@xxxxxxxxxxxx wrote on 01/22/2004 10:41:19 AM:

>
>
>
>
> Chris:
>
> Are you running Domino 6.5 doing what Trend told you?  I received an
email
> from Trend last week & they said SMLN 2.6 would not be available until
> February.
>
> I dont get a warm-fuzzy feeling with the statement "Under these
conditions,
> SMLN 2.51 with Patch 3 for AS/400 should be
> compatible with Domino 6.5." ...  key work SHOULD..... :-(
>
>
> Steve Jones
>
>
>

>              Chris Whisonant

>              <Chris.Whisonant@

>              comporium.com>
To
>              Sent by:                  domino400@xxxxxxxxxxxx

>              domino400-bounces
cc
>              @midrange.com
mike.ostrowski@xxxxxxxxxxxxxxxxxxxx
>                                        , stan.wilburn@xxxxxxxxxxxxx,

>
james.hickerson@xxxxxxxxxxxxxxxxxxx
>              01/22/2004 11:01          m

>              AM                                                     Fax
to
>

>
Subject
>              Please respond to         Trend Micro With Domino 6.5

>               Lotus Domino on

>                the iSeries /

>                    AS400

>              <domino400@midran

>                   ge.com>

>

>

>
>
>
>
> I have been having an issue with the Trend ScanMail Repscan task. They
> actually have a hotfix for the known issue, and I'm also having a
> different problem with repscan that the technicians are working on. Had
> two crashes the other day because of it. If you want details of the
hotfix
> (which should be applied to all systems according to the readme) just let
> me know. I am running v2.51 of ScanMail.
>
> Anyway, I mentioned in an email to tech support that I'm waiting to get
> ScanMail 2.6 so that it will work with iSeries. By the way, last I heard,
> ScanMail 2.6 should be out this month for iSeries, but until then the
> below steps should allow ScanMail 2.51 with patch 3 to work with Domino
> 6.5. Sure wish they would have made that available previously so I could
> have upgraded to 6.5 last year.
>
>  Below is the response from Trend Support...
>
> Chris Whisonant
> Comporium
> Senior Mid-Range Systems Administrator
> IBM eServer Certified Systems Expert - iSeries Technical Solutions V5R2
> IBM Certified Associate System Administrator - Lotus Notes and Domino 6
> 803.326.7270 (W)
> 803.326.6142 (F)
> ----- Forwarded by Chris Whisonant/COMPORIUM on 01/22/2004 10:51 AM -----
>
> <PhoneSupport@xxxxxxxxxxxxxxxxxxxxxx>
> 01/22/2004 10:43 AM
>
> To
> <Chris.Whisonant@xxxxxxxxxxxxx>
> cc
>
> Subject
> RE: 299222
>
>
>
>
>
>
>
>
> Hi Chris,
>
> The files have been submitted to our Product Specialist for analysis. We
> will keep you posted on their analysis.
>
> Question: Regarding your question on "I am really wanting to update my
> Lotus server to 6.5 and I am having to wait on SM for LN v 2.6SP1? to be
> released for the AS/400".
> Answer: Yes, we are in the process of developong still SMLN 2.6 that
would
> be able to fully support Domino 6.5. However, until it is released, here
> are the steps for Domino 6.5 to be used with SMLN 2.51 just in case you
> push through in upgrading to Domino 6.5:
>
> To use Domino 6.5 with SMLN 2.51 for AS/400:
>
> 1.      Install Patch 3 for ScanMail for Lotus Notes 2.51 for AS/400 (
> smln251_patch3_as400.zip) from
> ftp://ftp-download.trendmicro.com.ph/Groupware/SMLN/ Username: ftpuser
> Password: ftp-trend
> 2.      Install ScanMail at the same location where Domino has been
> installed.
>
> 3.      Verify that libnotes is in the "correct" place -
> /qsys.lib/qnotes.lib/libnotes.srvpgm
>
> Note: Do not use the new multi-version option.
> Under these conditions, SMLN 2.51 with Patch 3 for AS/400 should be
> compatible with Domino 6.5.
>
> Hope this answers your inquiry. If you still have further inquiries or
> concerns with regard to this matter, please email us and we'll be glad to
> assist you. And if this discussion has clarified the issue, may we close
> this case?
>
> Thank you very much and we look forward to your reply. Have a nice day.
>
> Best regards,
> ===================================================
> Janelane A. Remigio,MCSE,MCSA
> Product Support Services
> TrendLabs HQ, Trend Micro Incorporated
>
> -----Original Message-----
> From: Chris Whisonant [mailto:Chris.Whisonant@xxxxxxxxxxxxx]
> Sent: Thursday, January 22, 2004 10:19 PM
> To: Trendmicro phone support
> Subject: RE: 299222
>
>
> I will reply to these inline:
>
> > 1. Smvlog.nsf
> This is attached in the zip file. It is named smvlog299222.nsf
>
> > 2. Log.nsf (containing logs during the time and day the server crashed)
> This is attached in the zip file.  I have copied selecte misc. and
> replication events to the file log299222.nsf
>
> > 3. Pattern version
> Pattern version is always current - I have a server program that runs
> PUPDATE every 2 hours.
>
> > 4. Scan Engine version
> 6.510-1002 (I am really wanting to update my Lotus server to 6.5 and I am
> having to wait on SM for LN v 2.6SP1? to be released for the AS/400)
>
> > 5. Repscan build number
> RepScan Build 1121, Oct  9 2003 10:15:04
>
> > 6. Run the command "dsplib trendmicro" and send us the results. (If
> > possible in text format)
> This is attached and the file name is QPDSPLIB065813
>
> > 7. In the domino console, type:
> > load repscan -debug
> I have loaded this (reluctantly).
>
> >
> > 8. Scanmail for Lotus Notes repscan task temporary directory is
> > /tmp/Reptemp2/ Does this exist and have "qnotes" data authority of
> > *RWX on the AS400 IFS.
> This does exist and has the proper authority.
>
> > 9. How large is the free space for temporary files? Especially
> > /tmp/Reptemp2/, does it have enough disk space?
> On the OS/400 there is no way to change the free space for temporary
files
> - it has single-level storage. That said, I have about 77% free space out
> of a total of 562 GB.
>
>
> Chris Whisonant
> Comporium
> Senior Mid-Range Systems Administrator
> IBM eServer Certified Systems Expert - iSeries Technical Solutions V5R2
> IBM Certified Associate System Administrator - Lotus Notes and Domino 6
> 803.326.7270 (W)
> 803.326.6142 (F)
> _______________________________________________
> This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing list
> To post a message email: Domino400@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/domino400
> or email: Domino400-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/domino400.
>
>
>
> _______________________________________________
> This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing list
> To post a message email: Domino400@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/domino400
> or email: Domino400-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/domino400.
>

As an Amazon Associate we earn from qualifying purchases.

This thread ...
Follow-Ups:
Replies:
Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.