Re: Router Job in Domino subsystem -- DOMINO400

I wouldn't recommend running Domino in *BASE, honestly - it is dangerous
because it can take resources away from the activities OS/400 has to carry
out in the base pool. Better to allocate Domino its own shared pool via
WRKSHRPOOL and use that. Tune the maxima and minima the way you want them
(don't let the base pool get too small, & make sure Domino's pool is high
priority). Then the performance adjuster will sort things out for you
pretty well in our experience.

Another point - check you are not using PURGE(*YES) which was at one point
(maybe still is) set as the default on the Domino classes in QUSRNOTES and
which I would definitely recommend you change to PURGE(*NO) - Domino does
loads of waits & you don't want any more paging than you can help. (You
should have plenty of main storage available for Domino if your box has
been sized according to IBM's guidelines.)


      Regards,
      Mandy Shaw

      Catalyst Solutions plc
      Kingfisher House
      Frimley Business Park
      Camberley
      Surrey
      GU16 5SG
      UK

      http://www.catalyst-solutions.com
      Email: Mandy.Shaw@uk.catalyst-solutions.com

      Telephone: +44 (0)870 166 1000
      DDI: +44 870 166 1324
      Facsimile: +44 870 168 3920
      Mobile: +44 410 447966
      Email to mobile 'phone: mandyshaw@sms.genie.co.uk






ajager@olympic.nl on 12/09/2000 22:23:47

Please respond to DOMINO400@midrange.com

To:   DOMINO400@midrange.com
cc:    (bcc: Mandy Shaw/Pacific/UK)
Subject:  Re: Router Job in Domino subsystem






Mike,

In V4R4 the performance adjustment is aranged better then in earlier
version
from OS/400.
Make sure that the system value QPFRADJ is set tot option "2". With this
adjustment you make the AS/400 say OS/400 the manager of your performance
adjustment.

If the mail server is running in a other subsystem the you will be better
of by
putting the subsystem in the *BASE pool of your AS/400.  You can change the
subsystem with the command WRKSBSD <subsystemname>

When you changed the subsystem you need to stop Domino server and subsystem
end
start the Dominoserver again.

A tempory adjustment could be made by putting a greater value of max.
active in
the WRKSYSSTS command.

Hope this willl help.

Arjan Jager

www.solidium.nl




MEovino@ESTES-EXPRESS.COM on 12-09-2000 20:22:23

Please respond to DOMINO400@midrange.com

To:   domino400@midrange.com
cc:    (bcc: Arjan Jager/Beheer/OLYMPIC)

Subject:  Router Job in Domino subsystem





Is the Router job in the Domino (R5.0.3) subsystem referring to mail
routing, or is this something different?
If we move mail routing off a box, will we see this job disappear?  The
reason I ask is that we're using a 170 (V4R4M0) to handle both web serving
and mail routing, and the Router task generally has 22% of the CPU at all
times, and often has around 40% since we upgraded to R5.  We'd like to
shift mail routing to another box, as this is killing our ability to serve
our website.

Thanks in advance,
Mike Eovino
Estes Express Lines
http://www.estes-express.com/

+---
| This is the Domino/400 Mailing List!
| To submit a new message, send your mail to DOMINO400@midrange.com.
| To subscribe to this list send email to DOMINO400-SUB@midrange.com.
| To unsubscribe from this list send email to DOMINO400-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: meechamw@ptd.net
+---
You can't always get what you want.....

Best regards
Arjan Jag(g)er









+---
| This is the Domino/400 Mailing List!
| To submit a new message, send your mail to DOMINO400@midrange.com.
| To subscribe to this list send email to DOMINO400-SUB@midrange.com.
| To unsubscribe from this list send email to DOMINO400-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: meechamw@ptd.net
+---






----------------------------------------------------------------------
Catalyst Solutions plc.  Registered No 2918101.
Registered @ Kingfisher House, Frimley Business Park, Frimley,
Surrey. GU16 5SG   U.K.

NOTICE:
This message is intended only for the named addressee(s) and may
contain confidential and/or privileged information. If you are not the
named addressee you should not disseminate, copy or take any action
or place any reliance on it. If you have received this message in error
please notify postmaster@catalyst-solutions.com and delete the message
and any attachments accompanying it immediately.
----------------------------------------------------------------------


+---
| This is the Domino/400 Mailing List!
| To submit a new message, send your mail to DOMINO400@midrange.com.
| To subscribe to this list send email to DOMINO400-SUB@midrange.com.
| To unsubscribe from this list send email to DOMINO400-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: meechamw@ptd.net
+---