× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Re: Communication Console fixed, but .....
  • From: hockings@xxxxxxxxxx
  • Date: Sun, 10 Jun 2001 21:19:05 -0400
  • Importance: Normal


Let me clarify this a bit as it may have caused some confusion.  The IBM tools _do_ require the IBM SDK  (1.2) to have been installed (bet ya knew that already :-).  But it does not have to be set up as  the _system_ JRE.

If your other tools require the 1.3 JRE simply install (or re-install) the 1.3 JRE _after_ installing WDT400 (I'm talking v4r5m1 here) and set it as the system JRE as desired and all _should_ be fine.


Mike


Mike Hockings, P.Eng.
WebSphere Development Tools for AS/400  -  CODE/Designer & WebFacing !
IBM Canada Ltd. Laboratory
hockings@ca.ibm.com  
voice 416 448 3199, fax 416 448 4414

Please respond to CODE400-L@midrange.com

Sent by:        owner-code400-l@midrange.com

To:        CODE400-L@midrange.com
cc:        
Subject:        Re: Communication Console fixed, but .....



Hi Jim


It is _NOT_ required to load the IBM JDK's version of the JRE as the system JRE.  I think that you should have the option of doing that when it is installing.  Selecting NO when asked to install it as the system JRE is just fine.


I suspect that you could fix your problem by re-installing the 1.3 JRE.


Mike

Mike Hockings, P.Eng.
WebSphere Development Tools for AS/400  -  CODE/Designer & WebFacing !
IBM Canada Ltd. Laboratory
hockings@ca.ibm.com  

Please respond to CODE400-L@midrange.com

Sent by:        owner-code400-l@midrange.com

To:        CODE400-L@midrange.com
cc:        
Subject:        
Communication Console fixed, but .....


Greetings!


Thank you for the insight, installing the JRE from the IBM install disks
did fix the problem with the communication console.  It broke another
application that had loaded a 1.3 (version 2?) as the system JRE.  Is there
any way to get the 2 applications to cooperate?  I have the needed function
of the Code/400 development, and the desired function of the other
application.  If I have to, I will leave the IBM JRE in place, but would
like to be able to switch between them as needed, or to let them co-exist
without my intervention.  Any thoughts would be appreciated.




Jim Essinger
Senior Programmer/Analyst
Student Loan Fund of Idaho
208-452-4058
esinger@fmtc.com

+---
| This is the CODE/400 Mailing List!
| To submit a new message, send your mail to CODE400-L@midrange.com.
| To subscribe to this list send email to CODE400-L-SUB@midrange.com.
| To unsubscribe from this list send email to CODE400-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: larry@paque.net
+---





As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.