Re: Still mystified -- CODE400-L



Please check if the communication daemon of code400 in you PC is up and
running.

If it is not running, you can invoke it by:
Start --> Programs --> IBM WebSphere Development Tools for AS400 -->
Communications --> Communication Daemon.

After the daemon is running, give it a try again.

Regards,

Xuan Chen,  AS/400 AD Tools
(416) 448-3769 T/L 778-3769
xuanchen@ca.ibm.com



Jeff Crosby <jlcrosby@fwi.com>@midrange.com on 01/25/2001 07:17:28 AM

Please respond to CODE400-L@midrange.com

Sent by:  owner-code400-l@midrange.com


To:   "code400-l@midrange.com" <code400-l@midrange.com>
cc:
Subject:  Still mystified


What happened to the IBMers on this list this week?

Last week, I posted a message regarding my troubles getting the STRCODE
command
as well as the "E" edit command I have in PDM to work ever since I upgraded
to
WDT 4.5.1.  Late on Friday last week, an IBMer requested the joblog to be
posted.  I did that Monday morning this week.  So far there has been no
response
by the IBMer requesting the post, nor any other IBMer.  Here is the joblog
post
again.  I'm still stuck.

------------------------------------------------------------------

Edmund.Reinhardt@ca.ibm.com wrote:

> Your E command is probably not working because of the STRCODE problem.
> Why don't you post your STRCODE job log so that people can see what went
> wrong.

The reason I haven't posted that detail is the myriad of problems _others_
were
having with this install.  I went back into the archives and tried
everything I
could find as suggestions _there_ first.  This is not my first post,
however,
regarding troubles on this install.

Here is the job log:

strcode
The job's CCSID value is changed from 65535 to 00037 while the STRCODE
  command is active.
Default information for STRCODE retrieved successfully.
A TCP/IP communications error occurred.
Unable to start TCP/IP connection with the workstation.


Details for the last 3 messages:


                         Additional Message Information
Message ID . . . . . . :   EVF4100       Severity . . . . . . . :   10
Message type . . . . . :   Information
Date sent  . . . . . . :   01/22/01      Time sent  . . . . . . :
07:22:44
Message . . . . :   Default information for STRCODE retrieved successfully.
Technical description . . . . . . . . :
- The default information has been retrieved from *LIBL/STRCODE *USRSPC.
- The server name is AS400.
- The communications type is *TCPIP.
- The APPC remote location name is *ICFF.
- The TCP/IP remote location name is 4.0.0.3.
- The TCP/IP port is 4200.



                         Additional Message Information
Message ID . . . . . . :   EVF4000       Severity . . . . . . . :   30
Message type . . . . . :   Diagnostic
Date sent  . . . . . . :   01/22/01      Time sent  . . . . . . :
07:22:44
Message . . . . :   A TCP/IP communications error occurred.
Cause . . . . . :   A route to the remote host is not available.
- The name of the error is ERR_TCPIP (3429).
- The name of the function is ipClientConnect-connect.



                         Additional Message Information
Message ID . . . . . . :   EVF4002       Severity . . . . . . . :   30
Message type . . . . . :   Diagnostic
Date sent  . . . . . . :   01/22/01      Time sent  . . . . . . :
07:22:44
Message . . . . :   Unable to start TCP/IP connection with the workstation.
Cause . . . . . :   The TCP/IP connection between the AS/400 and CODE/400
on
   the remote workstation can not be established due to one or more errors.
Recovery  . . . :   This is likely due to a configuration problem on the
  AS/400 or remote workstation. Look in the job log for any previous
errors,
  correct the problem and run the STRCODE command again.
Technical description . . . . . . . . :   The connection to CODE/400 on the

  remote workstation could not be established.
- The remote location name is '4.0.0.3'.
- The port number is 4200.


> You obviously have a user library as your current library.

Yes.  I always have.  What should I have for my current library?

-------------------------------------------------------------------

--
-Jeff
The opinions expressed are my own and not necessarily
the opinion of my company.  Unless I say so.
+---
| This is the CODE/400 Mailing List!
| To submit a new message, send your mail to CODE400-L@midrange.com.
| To subscribe to this list send email to CODE400-L-SUB@midrange.com.
| To unsubscribe from this list send email to CODE400-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: larry@paque.net
+---




+---
| This is the CODE/400 Mailing List!
| To submit a new message, send your mail to CODE400-L@midrange.com.
| To subscribe to this list send email to CODE400-L-SUB@midrange.com.
| To unsubscribe from this list send email to CODE400-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: larry@paque.net
+---