MIDRANGE dot COM Mailing List Archive



Home » MIDRANGE-L » June 2014

Re: Power 8 sysplan. Possibly obsolete messages



fixed

Completely valid complaint.

Power8: NO HSL, NO 12X, NO IOP, NO PCI-X, NO SCSI. And remind me again what was a 3995. :-)


- Larry "DrFranken" Bolhuis

www.frankeni.com
www.iDevCloud.com
www.iInTheCloud.com

On 6/9/2014 3:05 PM, rob@xxxxxxxxx wrote:

I really don't look at sysplans all that much but is this some sort of
standard obsolete message:

- WARNING -- when a 2749 attaches a 3995 Optical Library DataServer, the
2749 must not be placed under the same IOP which drives the
Load Source DASD

This really shouldn't apply to a Power 8, right?
For one, isn't a Power 8 going to ask WTF is an IOP?

How about this?
- WARNING -- switching SCSI tape cards that can potentially control disk
(for example 5712) may not be switched between dissimilar operating
systems.
Does a Power 8 even support SCSI tape drives? If it does, it doesn't
support SCSI disk, right? Either exclusion kills the warning message,
right?

Rob Berendt






Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2014 by MIDRANGE dot COM and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available here. If you have questions about this, please contact