MIDRANGE dot COM Mailing List Archive



Home » MIDRANGE-L » March 2014

RE: New public IP address not working



fixed

I'm specifying 'any' for the service. No private IPs have changed, they're all the same.

-------- Original message --------
From: franz400
Date:03/08/2014 7:38 PM (GMT-06:00)
To: Midrange Systems Technical Discussion
Subject: Re: New public IP address not working

if your firewall is forwarding by port#/svc there may be more tables in the
firewall that need changing.
Your i should not change for this as long as you did not change the "inside"
private address of the firewall/router.
jim

----- Original Message -----
From: <rob@xxxxxxxxx>
To: "Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
Sent: Saturday, March 08, 2014 7:53 PM
Subject: Re: New public IP address not working


Networking isn't really my forte either, at least not on that level.
If you can't even connect by IP number then it's not a dns issue. If you
can, suspect DNS.
How far does traceroute get from the outside? Various OS's spell it
differently.
Might it be a NAT or Network Address Translation issue?


Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: Bob Cagle <bcagle@xxxxxxxxxxx>
To: "MIDRANGE-L@xxxxxxxxxxxx" <MIDRANGE-L@xxxxxxxxxxxx>
Date: 03/08/2014 07:10 PM
Subject: New public IP address not working
Sent by: midrange-l-bounces@xxxxxxxxxxxx



First off, I'm a one-man IT shop, and networking is NOT my specialty, AND
my normal network consultant is busy dealing with another customer's
emergency already - so I'm grasping at straws here:

My ISP just assigned me a block of new IP addresses with our latest
upgrade, so I had to assign a new public IP for the System i.

Made the changes to the firewall, and thought all was well; all I had to
do was change the public IPs from old to new - but now I'm unable to
connect to the System i remotely.

You would think this would be a firewall issue, but I've poured over this
Sonicwall and all the routing looks correct to me. I've even confirmed
with the ISP that the IP is routed correctly on their end.

Is there any TCP setting on the i that would be related to a public IP
address? I've gone through the CFGTCP options and all I see is the local
IP and domain referenced. (I'm able to connect to my desktop remotely via
TeamViewer)

Thanks

Bob Cagle
IT Manager
Lynk, Inc.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.






Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2014 by MIDRANGE dot COM and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available here. If you have questions about this, please contact