× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Jack,

We're current on PTFs (running V5R4M5) and the tapes are all brand new.
Already deleted and rebuilt the tape drive description. I'm trying a full
power down cycle to see if that resets what needs resetting. I tried to
vary on with a reset option, but that did not work either.

Rich Loeber - @richloeber
Kisco Information Systems
[1]http://www.kisco.com
SDG

--------------------------------------------------------------------------

On 1/31/2011 3:03 PM, Jack Kingsley wrote:

Clean the tape drive, check SST, delete recreat the tape drive. I saw some
hits on this error where older tapes were involved and having to wait on the
tape drive to rewind etc. You current on PTF's.

On Mon, Jan 31, 2011 at 2:42 PM, Rich Loeber [2]<rich@xxxxxxxxx> wrote:


Hello list,

I have a new E4A system with a 4mm tape drive. I was just trying to
initialize a new tape when the drive went south on me. I deleted the
tape
description and created it from scratch, but it will not vary on now.
I'm getting a CPD2616 error (device will not vary on) with reason code
00003404 which just says that an error occurred during the vary on
process. It says to check that the device is powered on, which it is. I
am able to manually remove the tape cartridge and re-insert it just fine.

Any ideas on where to go with this?

Seems kind of silly that it would throw up like this on a simple INZTAP
command.

Rich Loeber - @richloeber
Kisco Information Systems
[1][3]http://www.kisco.com
SDG

References

Visible links
1. [4]http://www.kisco.com/
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: [5]MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: [6]http://lists.midrange.com/mailman/listinfo/midrange-l
or email: [7]MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at [8]http://archive.midrange.com/midrange-l.

References

Visible links
1. http://www.kisco.com/
2. mailto:rich@xxxxxxxxx
3. http://www.kisco.com/
4. http://www.kisco.com/
5. mailto:MIDRANGE-L@xxxxxxxxxxxx
6. http://lists.midrange.com/mailman/listinfo/midrange-l
7. mailto:MIDRANGE-L-request@xxxxxxxxxxxx
8. http://archive.midrange.com/midrange-l

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.