× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Lukas,

That command runs successfully. I changed the name to ZEBRA11 and the IP
to 192.168.0.102. I do a 2 on my ZPL spool file and specify an OUTQ of
ZEBRA11. It goes to the ZEBRA11 OUTQ but it just sits there in RDY status.
The OUTQ is in RLS status. Do I need a writer attached to this OUTQ?

Aaron Bartell
http://mowyourlawn.com
http://mowyourlawn.com/blog/


On Wed, Jul 21, 2010 at 2:49 PM, Lukas Beeler <lukas.beeler@xxxxxxxxxxxxxxxx
wrote:

On Wed, Jul 21, 2010 at 21:15, Aaron Bartell <aaronbartell@xxxxxxxxx>
wrote:
The Zebra GK420t arrived today. I am pulling my hair out again
concerning
the setup because I am too ignorant to try anything logical and am just
throwing mud at the wall at this point. Too many terms being thrown
around
on the web search results like "you don't need a WCST object" and "make
sure
to configure it with a RMTPRTQ of 'PORTLF1' ", and I don't have a solid
understanding how a remote outq is different from a regular outq other
than
I see it seems to be using some PASE type features when it is created
(i.e.
'/prt01') via iNav.

A Remotq Outq uses the LPR protocol to send a spool file to another
system. The RMTPRTQ parameter specifies to which remote print queue
it's being sent - in case of a directly network attached printer, this
can be either inconsequential (Zebra print servers), specify the type
of content (HP, for example) or in case of another system it can
specify the other print queue (for example, when sending to another
IBM i machine.

Here's how i create my Zebra Remote OUTQ, with which i've installed a
few GK420ts just a few weeks ago:

CRTOUTQ OUTQ(PRTETIK) RMTSYS(*INTNETADR) RMTPRTQ('1') CNNTYPE(*IP)
DESTTYPE(*OTHER) TRANSFORM(*YES) MFRTYPMDL(*WSCST) WSCST(QWPDEFAULT)
INTNETADR('192.168.1.100') SEPPAGE(*NO)

As you can see, RMTPRTQ is '1' in this case - this is a dummy value.

Make sure you print SCS spool files that are 100% aligned to the left,
no spaces, no nothing. This can cause issues, otherwise.



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.