RE: UPS Questions

I read through the whole thread. Ah, memories.

We have the UPS attached to a J14 port on the 0595 expansion unit. It is
working properly in that we have had short power outages since then, and my
UPS handling programs are responding properly. I believe changing to that
J14 port ultimately cleared things up. I could test by unplugging the UPS
cable and reattaching, but I don't think that will help you if you're not
using a J14 port.

--
Jeff Crosby
UniPro FoodService/Dilgard
P.O. Box 13369
Ft. Wayne, IN 46868-3369
260-422-7531
www.dilgardfoods.com

The opinions expressed are my own and not necessarily the opinion of my
company.  Unless I say so.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-
bounces@xxxxxxxxxxxx] On Behalf Of Jerry Adams
Sent: Thursday, April 23, 2009 3:49 PM
To: Midrange-L (midrange-l@xxxxxxxxxxxx)
Subject: UPS Questions

First, I have been reading a post that Jeff started regarding UPS

attachment

to the System i (http://archive.midrange.com/midrange-
l/200602/msg01172.html). In brief, he was having an issue with the system
recognizing that the signal cable had been disconnected.

I didn't see anything in the thread regarding the resolution of this
condition. Nor did I find anything that in APAR or PTF cover letters that
looked like the issue had been addressed. Just curious if this was ever
resolved.

Second, we are going to get a new UPS (which is why I was scanning the
archives on the subject of 'UPS'). We have a 520 desktop system, no
expansion chassis, that we need to hookup to the new UPS. But the only

thing

that I can find regarding the power is in the System Handbook where it

says

the power supply is 850W. Nothing on the outside of the box; didn't pull

the

panels off to look inside. Just wanted to verify that I need to size the

UPS

to handle 850W; I'd hate to be under-powered - or buy more than I need.

Thanks.

Jerry C. Adams
IBM System i Programmer/Analyst
--
B&W Wholesale
office: 615-995-7024
email: jerry@xxxxxxxxxxxxxxx

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing

list

To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.