× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  1.  Home
  2. MIDRANGE-L
  3. July 2008

Re: Modernizing a 150 - need some documentation

vhamberg@xxxxxxxxxxx wrote:

"The #6713 is a Customer Install Feature on a Model 150 for an MES that only includes CIF features."

6713s are supported. I've two 150s with these drives.


The other 3 appear to be in some kind of cage - at least Dan thinks so. Is it something that swings out?

The cage is held by 2 screws at the top. The bottom has tabs (3) into the front panel. Remove the screws and then pull the cage back.


The SCSI cable is there for all 4 drives, as well as the power plugs. I suppose setting the jumpers is an address thing?

Look at the inside of the left cover. There should be a diagram of the jumper settings for the 4 drives, tape and CD.


Do I need to take the entire cover off? I have only the left one now - the left side as I look at the box from the front. Have not taken that other one off - the top-right one-piece.

No.


Keith

As an Amazon Associate we earn from qualifying purchases.

This thread ...
Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.