Re: Model 320 questions

Don't worry about the 74A rating as that's 'Inrush' current and only
happens when the power supplies are connected to power for about the first
1 cycle. (Check any circuit breaker and you'll see they are rated for
10,000A for 1 cycle to allow for such things.) The actual amp draw on
110V would be about 8 (ish) if the thing is fully packed and about 4 on
220v. Nothing at all to be concerned about - you can safely plug the thing
into any average wall outlet - just not the one the hair dryer is plugged
into. :-)

BTUs as I mentioned before is a max of 2867 but again that's fully packed
and populated with 4 processors, max memory and an IXS card. You'll likely
see 1/2 to 2/3rds of that.

- Larry

Read all about it here:
http://publib.boulder.ibm.com/infocenter/systems/scope/hw/index.jsp?topic=/iphad/i820.htm
(And it's a shorter link too!)

Larry Bolhuis IBM Certified Advanced Technical Expert -
System i Solutions
Vice President IBM Certified Systems Expert:
Arbor Solutions, Inc. System i Technical Design and
Implementation V5R4
1345 Monroe NW Suite 259 eServer i5 iSeries LPAR Technical
Solutions, V5R3
Grand Rapids, MI 49505 IBM Certified Specialist
System i Integration with BladeCenter
and System x V1
(616) 451-2500 System i IT Simplification: Linux
Technical V5R4
(616) 451-2571 - Fax iSeries System Administrator for OS/400
V5R3
(616) 260-4746 - Cell





"Peter Dow (ML)" <maillist@xxxxxxxxxxxxxxx>
Sent by: midrange-l-bounces@xxxxxxxxxxxx
07/09/2008 04:22 PM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
cc

Subject
Re: Model 320 questions






Thanks Pat -- that's one heck of a link (lengthwise that is). It says
it can operate on 110-220VAC and uses 0.862 kVA, and says the starting
current is 74A. Looks like I'd need a new circuit for that. No mention
of BTUs.

Pat Barber wrote:

Not that old..

http://www-01.ibm.com/common/ssi/index.wss?DocURL=http://www-01.ibm.com/common/ssi/rep_sm/5/897/ENUS9406-_h05/index.html&InfoType=DD&InfoSubType=SM&InfoDesc=HW+%26+SW+Desc+%28Sales+Manual%2C+RPQ%29&panelurl=index.wss%3Fbuttonpressed%3DDET001PT116%26page%3D1000%26paneltext1%3DDET001PEF012%26user%2Btype%3DEXT&paneltext=HW%20&%20SW%20desc%20(Sales%20manual,%20RPQ)

and it supports current releases.


Peter Dow (ML) wrote:

Ok, sorry for the misinformation.

Model number . . . . . : 820
Processor feature . . : 24AC

Auxiliary storage:
System ASP . . . . . . : 527.4 G
% system ASP used . . : 85.8130
Total . . . . . . . . : 527.4 G

That also explains why I couldn't find model 320 in the info center --
too old.

So what's the story on the 820?