Re: How To Configure Console Address

Thank you, everyone.

The console (Memorex Telex 1477) has setup-key, press
the button and then showed 'Online Setup Menu' screen.

I found 'display address : 3' on the parameter screen,
but could not edit the value.
Then I tried to turn on the console with pressing
space button, the editable setup menu came up. I could
change the address '0' on the screen.

We already lost the manual of the consoles and did not
realize how to use the setup button. Now I learn that.

Many thanx.


--- Jerry Adams <jerry@xxxxxxxxxxxxxxx> wrote:

Some twinax terminals can be set by powering off the
device, holding the 
space bar down, and powering on the device (let up
on the space bar once 
you hear the clicking sound).  Follow the menu
options.


Some others have a "Setup" key; usually in the lower
left-hand corner of 
the display.  For those just press the Setup key
after signing off of 
any session/job.


      * Jerry C. Adams
*IBM System i5/iSeries Programmer/Analyst
B&W Wholesale Distributors, Inc.* *
voice
      615.995.7024
fax
      615.995.1201
email
      jerry@xxxxxxxxxxxxxxx
<mailto:jerry@xxxxxxxxxxxxxxx>



fu_james@xxxxxxxxxxxxxx wrote:

I believe the address is set in the console

itself. You need to change the

address from 3 to 0 in your secondary console.

Sorry I forget the

function keys that will lead you to the

configuration menu in the console.

Please check your manual...

Best Regards.

James Fu

TDL Group Corp. (Tim Hortons)
Oakville, Ontario
Direct: 905-339-5798
fu_james@xxxxxxxxxxxxxx
Web: http://www.timhortons.com


                                                  

             TacK                                 

             <kinjo40@xxxxxxxx                    

             m>                                   

                     To 

             Sent by:                 

midrange-l@xxxxxxxxxxxx             

             midrange-l-bounce                    

                     cc 

             s@xxxxxxxxxxxx                       

                Subject 

                                       How To

Configure Console Address    

             02/27/2007 10:34                     

             AM                                   

             Please respond to                    

             Midrange Systems                     

                 Technical                        

                Discussion                        

             <midrange-l@midra                    

                 nge.com>                         

I have two consoles connected by TWINAX cable.
Promary console is port 0 and address 0 and

secondary

console is port 3 and address 3. address 1 and 2

is

shared by printer.

Now the display of the primary console has been

broken

down and I need to replace the secondary console

as a

primary. I tried to pulgin the cable which is
connedted to the primary and turned on the

console,

but the console is recognized as port 0 and

address 3.

Does anybody know how to configure the address on

the

console? or do I have to IPL?

____________________________________________________________________________________

Expecting? Get great news right away with email

Auto-Check.

Try the Yahoo! Mail Beta.

http://advision.webevents.yahoo.com/mailbeta/newmail_tools.html

--
This is the Midrange Systems Technical Discussion

(MIDRANGE-L) mailing list

To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:

http://lists.midrange.com/mailman/listinfo/midrange-l

or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the

archives

at http://archive.midrange.com/midrange-l.



The information contained in this message is

confidential and may be legally privileged. The
message is intended solely for the addressee(s).  If
you are not the intended recipient, you are hereby
notified that any use, dissemination, or
reproduction is strictly prohibited and may be
unlawful. If you are not the intended recipient,
please contact the sender by return e-mail and
destroy all copies of the original message.

L'information contenue dans ce  message est de

nature confidentielle et peut etre de nature
privilegiee. Ce  message est strictement reserve a
l'usage de son ou ses destinataires. Si vous  n'etes
pas le destinataire prevu, prenez avis, par la
presente, que tout usage,  distribution, ou copie de
ce message est strictement interdit et peut etre 
illicite. Si vous n'etes pas le destinataire prevu,
veuillez en aviser  l'expediteur par courriel et
detruire tous les exemplaires du message original.

-- 
This is the Midrange Systems Technical Discussion
(MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:

http://lists.midrange.com/mailman/listinfo/midrange-l

or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the
archives
at http://archive.midrange.com/midrange-l.

 
____________________________________________________________________________________
Don't get soaked.  Take a quick peak at the forecast
with the Yahoo! Search weather shortcut.
http://tools.search.yahoo.com/shortcuts/#loc_weather