× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



At this point, it may be wise to hire someone to provide you with live 
phone support. They wouldn't need to spend a lot of time since it will be 
to run a few commands and then hang-up and wait for the tasks to be done 
etc.

Vendor ON
If you don't the details you need via the list I would be glad to assist. 
Please contact me off list.
Vendor OFF


_____________________
Kirk Goins
Systems Engineer, Manage Inc.
IBM Certified in i5 Solution Sales,
i5 Technical Solutions Expert V5R4,
iSeries Multiple Systems Administrator V5R3,
Systems Expert - i5 LPAR Technical Solutions V5R3

Office 503-353-1721 x106 Cell 503-577-9519
kirkg@xxxxxxxxxxxxx   www.manageinc.com

Email Response Times: 
Same Day Maybe, Next Day Probably



"Douglas Palme" <dpalme@xxxxxxxxxxx> 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
11/16/2006 11:13 AM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
"'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
cc

Subject
Removing a drive







A few weeks ago I posted a message about replacing and removing drives 
from
one of my servers and several responses pointed me to using SST and 
another
option which I do not immediately recall.

 

I am using a 9409-170 2290.  I have a 7102 expansion unit which is not
currently attached and although I do plan on attaching it, I would like to
enable mirroring on the existing first two drives before doing so.  My
problem is this particular machine has three drives.  What I need to do is
move the data off of this drive onto the other two, remove it, and then 
add
two additional drives to mirror the 2 existing.  After that I will be
attaching the 7102 and expanding the capacity with mirroring.

 

What I have not been able to figure out is exactly what steps I need to 
take
to move that data off of the third drive onto the first two.

 

 

Drives 1 & 2 are 8GB drives (originally thought they were 4's but was
incorrect) and drive 3 is an 18GB drive.

 

Any help would be appreciated.

 

 



****************************************************************************
This transmission may contain information that is privileged,
Confidential and/or exempt from disclosure under applicable law.
If you are not the intended recipient, you are hereby notified that
any disclosure, copying, distribution, or use of the information
contained herein (including any reliance thereon) is STRICTLY
PROHIBITED. If you received this transmission in error, please
immediately contact the sender and destroy the material in its
entirety, whether in electronic or hard copy format. Thank you.
****************************************************************************

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.