Management central failing to start after abnormal system end.

Attempt to open the Management Central part of iSeries Navigator 
hangs.  Ran the verify.  Looked at joblog of verify and notice: 
MCH3203    Escape                  60   08/11/05  15:58:40.771976 
< aCreateJVM             000928   QJVAJNI     QSYS        *STMT 
>From user . . . . . . . . . :   QYPSJSVR 
>From Program  . . . . . . . :   JavaCreateJVM 
To module . . . . . . . . . :   QJVAJNI 
To procedure  . . . . . . . :   JNI_CreateJavaVM 
Statement . . . . . . . . . :   833 
Message . . . . :   Function error X'1716' in machine instruction. 
Internal 
dump identifier (ID) 02004D45. 
Cause . . . . . :   The machine instruction that was running 
failed. Time 
stamp is 08/11/05 15:58:40, error code is X'1716', error class is 
0, device 
number is X'0000'. The error class indicates how the damage was 
detected: 
0000-unspecified abnormal condition; 0002-logically invalid device 
sector; 
0003-device failure. For error class 0003, the device number 
identifies the 
failing device, or contains zero if main storage failed. 
Recovery  . . . : 
Start problem analysis (ANZPRB command) 
 
 
Also STRTCPSVR *MGTC results in the QYPSJSRVR being submitted, but 
it quickly ends.  It's joblog contains: 
MCH3203- 
>From Program  . . . . . . . :   JavaCreateJVMTo 
module . . . . . . . . . :   QJVAJNI 
To procedure  . . . . . . . :   JNI_CreateJavaVM 
Statement . . . . . . . . . :   833 
Message . . . . :   Function error X'1716' in machine instruction. 
Internal 
  dump identifier (ID) 02004D4A. 
Cause . . . . . :   The machine instruction that was running 
failed. Time 
  stamp is 08/11/05 16:01:10, error code is X'1716', error class 
is 0, device 
  number is X'0000'. The error class indicates how the damage was 
detected: 
  0000-unspecified abnormal condition; 0002-logically invalid 
device sector; 
  0003-device failure. For error class 0003, the device number 
identifies the 
  failing device, or contains zero if main storage failed. 
Recovery  . . . : 
  Start problem analysis (ANZPRB command). 



Rob Berendt