× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  1.  Home
  2. MIDRANGE-L
  3. August 2005

Change Work Station Controller Name

Hi,
We're migrating from a 620 to a 520 next weekend, and I was just playing with the setup of the twinax devices on the 520.
On both iSeries's, the QDEVNAMING SYSVAL is set to *DEVADR. So a display on Workstation Controller 02, Port 03 with switch 05 gets assigned the name DSP020305.
And, on the 620, the three work station controllers are CTL02, CTL03 and CTL04. So the names of all our twinax displays are DSP02xxxx, DSP03xxxx or DSP04xxxx.
On the 520, the work station controllers are called CTL05, CTL06 and CTL07 (from WRKHDWRSC *LWS). Even though the Work Station Controller Description I have assigned to each controller are CTL02, CTL03 and CTL04 (from WRKCTLD *ALL) the names assigned to the twinax displays I plug into them begin DSP05, DSP06 or DSP07. How do I change the names of the workstation controllers from say CTL05 to CTL02, so that the same names are used on the 520 as on the 620? 

Cheers

Guy

As an Amazon Associate we earn from qualifying purchases.

This thread ...
Follow-Ups:
Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.