Re: IOP that supports dial up PPP, model 400 V3R7

Carl,  I think this page is what you are looking for:
http://www-912.ibm.com/s_dir/slkbase.nsf/1ac66549a21402188625680b0002037e/88da30c3ff7491a586256664006652b6?OpenDocument&Highlight=0,ppp


<snip>
To run SLIP on the OS/400 system, the system must be at R320, R370, or
higher.
There are two families of adapters and associated IOPs that can be used.
The following asynchronous communications line adapters can be used with
the 2623 IOP or the Multi-Function I/O Processor (MFIOP) on AS/400 Advanced
Series Models 4XX and 5XX.
o     2609 - Two-line EIA 232/V.24 adapter
o     2612 - One-line EIA 232/V.24 adapter
o     2809 - PCI LAN/WAN/Workstation IOP
The following line adapters can be used with either the 2629 IOP or MFIOP
on the AS/400 Advanced Series models 150 and 6XX:
o     2699 - Multiline Communications IOP
o     2720 - One-line twinaxial EIA-232/V.24, V.35, X.21
o     2721 - Two-line EIA-232/V.24, V.35, X.21
Note: The OS/400 system does not support an internal modem. The OS/400
system requires an asynchronous communications line adapter and a Hayes**
compatible (AT command set) external modem.

</snip>



----------------------------
Bryan Dietz
Aktion Associates

midrange-l-bounces@xxxxxxxxxxxx wrote on 03/29/2005 12:19:57 PM:

> I know that dial up PPP was included at V3R7.  I need to configure dial
up
> PPP on a model 400.  I know not all comm adapter support dial up PPP,
does
> anyone know which ones will?
> cjg
>
> Carl J. Galgano