× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Several years ago when a new building was built & a new network was
installed, we plugged the 400's into a switch.  After much trial &
tribulation, we were told to plug the 400's into a hub.

We are about to upgrade all our switches, routers, & hubs to accommodate a
new phone system & AT&T dedicated T1's to our two remote mining facilities.

The question is:  Do I still plug the 400's into a hub or a switch and/or is
there a setting that could be changed to allow use to use a switch?

In case it makes any difference we currently have 3Com 3000 switches & 3Com
dual speed 500 hubs with the router being built into the phone system, which
is ten years old.  This ancient but still functioning equipment has caused
other problems & it will be nice to see it out of here.  QoS was something
we are not able to currently do but that will change with the new equipment.

The equipment we will replace it with will be Cisco 2620 routers, Cisco 3550
and 2950 switches, & no hubs - which is why I'm asking the question in case
we still need to have a hub for the 400's.

Thanks - Dennis.

Dennis Munro

"I love deadlines.  I especially like the whooshing sound they make as they
go flying by."  Dilbert's Words Of Wisdom:

Badger Mining Corporation
www.badgerminingcorp.com
dmunro@xxxxxxxxxxxxxxxxxxxx
(920) 361-2388

The information contained in this e-mail message is confidential information
intended only for the use of the individual or entity named above. If the
reader of this message is not the intended recipient, or the employee or
agent responsible to deliver it to the intended recipient, you are hereby
notified that any dissemination, distribution or copying of this
communication is strictly prohibited. If you have received this
communication in error, please immediately notify us by telephone, and
return the original message to us at the below address via the U.S. Postal
Service, and delete it from your computer.  Badger Mining Corporation  P.O.
Box 328  Berlin, WI 54923  920-361-2388

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.