|
Machine Pool is at 204.5 MB. Machine pool is fine. Regards, Mike Shaw -----Original Message----- From: midrange-l-bounces+mhshaw=worldnet.att.net@xxxxxxxxxxxx [mailto:midrange-l-bounces+mhshaw=worldnet.att.net@xxxxxxxxxxxx] On Behalf Of Igor, aka J Oberholtzer Sent: Sunday, April 13, 2003 12:36 PM To: Midrange Systems Technical Discussion Subject: Re: Model 270 At V5R2 Is Dead Toad Slow Running JDE One World....... <snip> That is all fine, system is set to tune itself via system value settings. Pools are the same size at V5R2. </snip> Mike, The tuning may just be the problem. V5R2 needs more memory at the *BASE and Machine pool levels. If you're system has not been properly tuned, the memory allocations could be wrong. Keep in mind that the system tuning features like to give memory and activity levels to pools, but rarely does a good job of removing them. OS/400 lives in *BASE and Machine pools and if OS/400 struggles for resources, so will JDE. I would suggest a manual tuning first, giving *BASE and Machine pool more memory and let the system go from there. Here is the formula for setting the base and machine pools: S=M+J+L+F+D + Guest(Linux) S = Base M = Minimum Machine pool size J = Job Space L = Communications Space F = Functional Space D = Disk Space Guest = Total memory given to Guest Partitions The Machine pool should be set with this formula: Multiply main storage by .04 Add 12mb (12288K) So, a 2048 MB machine: 2097152 * .04 + 12288 = 96175k 97 MB Is minimum Then allocate the balance of the memory to the rest of the system. Also keep in mind that a 2gig/processor minimum is generally accepted as the minimum memory for the advanced OS versions. V5R2 is significantly bigger than V5R1. It has significantly better functionality as well, thus the reason for the size. Another thing to be aware of. Unless you have changed it, JDE runs all the QZDASOINIT jobs it needs in *BASE. In my view a very bad thing. With that configuration JDE is fighting OS/400 for resources. Everyone looses in that case. You should consider moving these server jobs into a separate subsystem where you can properly tune and control them. Just my $0.02, however I have been there done that with JDE tuning before. Igor at www.franenseries.com aka: Jim Oberholtzer IBM Certified in Design, Implementation, System Admin and lots of other areas. _______________________________________________ This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo.cgi/midrange-l or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.