RE: Problems with Perle 494E

["Steve Richter" <srichter@xxxxxxxxxxxxx>]

Chuck,

can you boot the perle in config mode?  Then press alt-test on a terminal to
make sure the controller sees the terminals. That would confirm that the
twinax card in the perle is still working.

also, Perle tech support was always very good whenever I used to call them
with problems like this.

good luck,

Steve


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of Chuck Lewis
Sent: Wednesday, April 09, 2003 9:33 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Problems with Perle 494E


jt,

It has been varied on and off, turned on and off, deleted, recreated
auto and manually (via a RTVCFGSRC), controller reconfigured, you name
it - you WRKCFGSTS *CTL RM* and see the controller ACTIVE and all the
devices under it VARY ON PENDING ! ! ! !

I'm headed back tomorrow after recreating the stuff at work (latest rev
is on my desktop and didn't have my notebook with me today...)

Chuck



-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of jt
Sent: Wednesday, April 09, 2003 5:44 PM
To: Midrange Systems Technical Discussion
Subject: RE: Problems with Perle 494E


| [mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of Chuck Lewis

I wuz gonna say phone line, until you said you could ping it, Chuck.

|  Cause . . . . . :   The request to start a session for a device RM11
on
|
|    controller RM080RMT using mode QRMTWSC on APPC device RM0801
| failed.

Very doubtful it would help (since you auto-config'd everything):  Vary
off/on control unit??  Vary/power off/on, mebbe??

Since CUD appears to be buggered, are any messages (on QSYSOPR)
regarding the control unit helpful a-tall??  (Ahhhh..... luv-ta deal
with hardware
problems...;-)

_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.