Re: Cannon Imagerunner 105

heh ... wa sjust going to post to find out what needed modifying.

I am following Knowledge base article 8692422

I Get this

 Selection or command
 ===> CRTWSCST WSCST(HP4) SRCMBR(*WSCST) TEXT(*SRCMBRTXT)
SRCFILE(QGPL/QTXTSRC)
AUT(*LIBCRTAUT) REPLACE(*YES)

 Workstation customization object HP4 not created.

Where do I look to see why it was not created?

Adam Lang
Systems Engineer
Rutgers Casualty Insurance Company
http://www.rutgersinsurance.com
----- Original Message -----
From: "Paul Tykodi" <paul@intermate-us.com>
To: <midrange-l@midrange.com>
Sent: Friday, November 22, 2002 1:18 PM
Subject: Re: Cannon Imagerunner 105


> Hi Adam,
>
> You will need to create a workstation customization object from the *HP4
> source file. Change the parameter that is holding the escape sequence
which
> is sent when source drawer 1 is called for by an OS/400 program so that
> automatic selection is enabled.
>
> :DWRSLT
> DRAWER=DRAWER1
> DATA = '1B266C3148'X. (upper paper cassette)
>
> Change this entry so that DATA = '1B266C3748'X. (automatic selection of
> input tray)
>
> The automatic selection function is tied to the paper size requested by an
> application. Since your OS/400 applications will not be requesting ID
cards,
> this is the only change you should need to make on the OS/400 side to get
> your application pulling paper from the desired input tray.
>
> HTH
>
> Best Regards,
>
> /Paul
> --
> Paul Tykodi
> National Product Manager
> Intermate US Inc.
>
> p: 603-431-0606 x115
> f: 603-436-6432
> E-mail: paul@intermate-us.com
> www.intermate.com
>
> >From: "Adam Lang" <aalang@rutgersinsurance.com>
> >To: <midrange-l@midrange.com>
> >Subject: Cannon Imagerunner 105
> >Date: Fri, 22 Nov 2002 12:01:55 -0500
> >Reply-To: midrange-l@midrange.com
> >
> >Well, we just got a Canon IR 105.
> >
> >I set up a virtual device and a rmtoutq just fine.
> >
> >The problem is, when printing from the as/400, it always wants to sue
> drawer
> >1.
> >
> >Well, the only drawer that has plain paper is drawer 5 (side drawer).
> >Everything else has ID cards we don't wan tto be printed on. ;)
> >
> >As printing from windows is set to "AUTO" and goes out drawer 5, our
> >protection is set ok.  So apparently the AS/400 is specifically telling
it
> >to go to drawer 1.
> >
> >How do we set up the device or outq to send all print via drawer 5?  we
are
> >using the HP4 driver on the AS/400.
> >
> >Adam Lang
> >Systems Engineer
> >Rutgers Casualty Insurance Company
> >http://www.rutgersinsurance.com
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.