MIDRANGE dot COM Mailing List Archive



Home » MIDRANGE-L » September 2002

Re: RE: 3490 and V5R1



fixed

The init fails indicating that it is the wrong type of cartridge in the device, 
but we have used these cartridges in the past:

Command used:
 INZTAP DEV(TAP03) NEWVOL(092202) CHECK(*NO) DENSITY(1600)

Message received:
Wrong type of cartridge in device TAP03.

If we use a density of 3200 it works.

Dave

>>> "Andy Nolen-Parkhouse" <aparkhouse@attbi.com> 9/27/02 9:19:57 AM >>>
Dave,

What are the symptoms?  Is the parameter no longer valid or does the
initialization fail in some other way?

Andy Nolen-Parkhouse

> On Behalf Of Dave Snyder
> Subject: 3490 and V5R1
>
> We moved to V5R1 this past weekend from V4R5. We have a 3490 tape
drive
> and can now not initialize tapes at 1600 BPI. Is this a change with
V5R1
> or something else?
> Any clues?
> Dave


_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.








Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2014 by MIDRANGE dot COM and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available here. If you have questions about this, please contact