MIDRANGE dot COM Mailing List Archive



Home » MIDRANGE-L » November 2001

Re: List of iSeries supported printers



fixed

M
Hello Adam,

I don't know of a list of printers but searching the IBM knowledge base may
net you something.

I use an Epson Colour Stylus 800 to print from my 170.  The printer is
attached to my OS/2 Warp Server and I have LPD running on OS/2.  I defined a
remote output queue on the AS/400 which points to the printer via the OS/2
server.  The printer is also a shared printer for the OS/2 workstations on
the LAN.  You should be able to accomplish the same sort of thing under
windoze.

I haven't tried printing 198 column reports but everything up to 132 columns
works fine.  The technical specs for the printer show 160 columns (at 12 CPI
condensed) to be the maximum width but that is probably in portrait mode.  I
know the Stylus 800 can print in landscape mode.  Have you tried setting the
PAGRTT value to *COR on the printer file (use CHGPRTF or OVRPRTF)?

Did I mention OS/2 enough times?  OS/2, OS/2, OS/2, OS/2!

Regards,
Simon Coulter.


 FlyByNight Software         AS/400 Technical Specialists       
 Eclipse the competition - run your business on an IBM AS/400.  
                                                                
 Phone: +61 3 9419 0175   Mobile: +61 0411 091 400        /"\   
 Fax:   +61 3 9419 0175   mailto: shc@flybynight.com.au   \ /   
                                                           X    
               ASCII Ribbon campaign against HTML E-Mail  / \   







Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2014 by MIDRANGE dot COM and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available here. If you have questions about this, please contact