Re: Recently went to v4r5 from v4r4... -- MIDRANGE-L

Sorry I fat fingered the upgrade release level....Should read V4R3 to
V4R5.........

Mike
----- Original Message -----
From: "Mike Shaw" <mshaw@ncal.verio.com>
To: <MIDRANGE-L@midrange.com>
Sent: Thursday, August 09, 2001 7:45 AM
Subject: Re: Recently went to v4r5 from v4r4...


> Saw this back in Dec. after doing V4R3 to V4R4 upgrade.  Telnet and 3270
> users connecting to the AS/400 were not able to get into the system.  In
our
> case, it was caused by the QCRTAUT system value being set to *USE.  This
was
> required by Federal Regulatory Agency audit findings.........
>
> When V4R5 was installed, the Create Authority parameter on the library
QSYS
> got set back to *SYSVAL (was *CHANGE at V4R3 prior to upgrade).......The
end
> result was that users connecting to the AS/400 did not have *CHANGE
> authority needed to allocate or create a new *DEVD.  They would get the
same
> message you reference below.  We fixed it by changing the Create Authority
> parm on the library QSYS back to *CHANGE.   We also deleted the *DEVD's
that
> were problems here and let them re-create at the next sign on request.
>
> HTH.......
>
> Regards,
>
> Mike Shaw
> Senior AS/400 Systems Engineer
> NONSTOP Solutions, Inc.
> SF, CA
> ----- Original Message -----
> From: <slegg@ovec.com>
> To: <MIDRANGE-L@midrange.com>
> Sent: Thursday, August 09, 2001 4:53 AM
> Subject: Recently went to v4r5 from v4r4...
>
>
> > We are intermittently experiencing people having trouble getting a
Telnet
> > session.  Sometimes they do and sometimes they don't.  Once you get one,
> you're
> > fine.  I mean they're not getting knocked off.
> >
> > For those  using Reflection 7.0 to connect, they are getting error
message
> "Your
> > connection to <machine name> has been terminated."  When trying Client
> Access
> > Express, it just sits there for extended periods of time...and
eventually
> will
> > bring up a session.  Something isn't allowing the connection to happen
to
> the
> > Telnet server stuff.  I guess?
> >
> > When we upgraded, we put the latest, greatest of everything on.  An IBM
CE
> > assisted us with the upgrade.  I have phoned this into support and they
> are
> > struggling with it.  Anybody got any ideas?
> >
> >
> > +---
> > | This is the Midrange System Mailing List!
> > | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> > | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> > | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> > | Questions should be directed to the list owner/operator:
> david@midrange.com
> > +---
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
david@midrange.com
> +---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---