Re: 5294 and 5821 modems

[Pat Barber <MBOCEANSIDE@xxxxxxxxxxxxxxxxxxxxxxxxxxx>]

bstedman@cis-corp.com wrote:
> 
> I need some help with the above configuration; can not get it to work and have
> tried all I know.
> 
> AS/400 at V3R2, 2613 com adapter (2 port), to 5821 modem set for 9600 leased 
>to
> 5821 modem attached to 5294.
> 
> The settings on the 5294 are:
> field 1:  00
> field 2:  C1
> field 3:  0110000000
> 
> The line description is setup as SDLC, 9600 NRZI - yes, duplex - full.
> The controller is *RWS, *SDLC, EXCID = 045000C1, stnadr - C1
> The device is *DSP, class - *RMT, type - 3180, Model 1.
> 
> I have tried every combination I can think of on the AS/400( NRZI on and off,
> duplex full and half) and the phone company has verified the line 4 times
> finding it setup incorrectly the first time.
> 

Have the same setup using 7852/400 modems and it works fine.. The modem
setting
is the most likely problem, very closely followed by phone lines... Many
phone
folks will toy with you on this... I would first set this up in a normal
"dial" setup and get that working and then switch over to lease after
all 
the other wrinkles are gone.... Modem cables can be a problem.....
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---