|
We had this problem with our Lexmark. We had to create a PSFCFG file. Also, try extending your timeout parameter on your printer. If you still have problems, try calling Lexmark support - they are very good. User resource library . . . . . . . . . . . . . : *JOBLIBL IPDS pass through . . . . . . . . . . . . . . . : *YES Activate release timer . . . . . . . . . . . . . : *NORDYF Release timer . . . . . . . . . . . . . . . . . : *SEC30 Restart timer . . . . . . . . . . . . . . . . . : *IMMED SNA retry count . . . . . . . . . . . . . . . . : 2 Delay time between retries . . . . . . . . . . . : 0 Blank page . . . . . . . . . . . . . . . . . . . : *YES Page size control . . . . . . . . . . . . . . . : *NO Resident fonts . . . . . . . . . . . . . . . . . : *YES Resource retention . . . . . . . . . . . . . . . : *YES Edge orient . . . . . . . . . . . . . . . . . . : *NO Use outline fonts . . . . . . . . . . . . . . . : *NO Remote location: Name or address . . . . . . . . . . . . . . . : *NONE TCP/IP port . . . . . . . . . . . . . . . . . . : *NONE TCP/IP activation timer . . . . . . . . . . . . : 170 PSF defined options: *NONE Eric Kempter CommAir Mechanical Services, Inc. -----Original Message----- From: S.A. Centea [SMTP:acentea@yahoo.com] Sent: Wednesday, June 02, 1999 1:47 PM To: MIDRANGE-L@midrange.com Subject: Network printer link droped Here's my problem for the connexion gurus on the list. I created several *LAN TCP/IP printers (ordinary & IPDS) via CRTDEVPRT, each one with its own IP address. All printers are HP or Lexmark, ethernet 10/100, local or remote. Everything is working fine ... but the writers are dropped several times a day. The bug occurs when a first file is to be printed, having the message : __________________________________________________ Message ID . . . . . . : PQT3621 Severity . . . . . . . : 40 Message type . . . . . : Information Message . . . . : The session with device xxxxx ended abnormally. Cause . . . . . : The session with device xxxxx at RMTLOCNAME 199.202.202.43, using PORT 9100, ended abnormally. The error code is 20, which indicates one of the following conditions: 20-39: A communications failure occurred. 40-59: An internal failure occurred. Recovery . . . : For error codes 20-39, check for problems in your network. After correcting the problem, start the printer writer ( ... ) __________________________________________________ I checked all parms, nothing seems to be wrong. The network guys confirmed having no problem from their part. I extended my tests and defined remote IP OUTQs on the same printers. They work OK and are always ON, as they don't have any printer writer attached. But I cannot use them in IPDS, so I return to the need of having IP printer writers ... When I restart the writer, all accumulated spools in OUTQ are printed normally. But I know next time it will behave the same and the connexion will be dropped. Any ideas ??? Thanks === Andrei Centea Canadelle Inc - Sara Lee Corp. Montreal _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com +--- | This is the Midrange System Mailing List! | To submit a new message, send your mail to MIDRANGE-L@midrange.com. | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com. | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com. | Questions should be directed to the list owner/operator: david@midrange.com +--- +--- | This is the Midrange System Mailing List! | To submit a new message, send your mail to MIDRANGE-L@midrange.com. | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com. | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com. | Questions should be directed to the list owner/operator: david@midrange.com +---
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.