× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Network printer link droped
  • From: "S.A. Centea" <acentea@xxxxxxxxx>
  • Date: Wed, 2 Jun 1999 13:47:17 -0700 (PDT)

Here's my problem for the connexion gurus on the list.

I created several *LAN TCP/IP printers (ordinary &
IPDS) via CRTDEVPRT, each one with its own IP address.
All printers are HP or Lexmark, ethernet 10/100, local
or remote.

Everything is working fine ... but the writers are
dropped several times a day. The bug occurs when a
first file is to be printed, having the message :
__________________________________________________
                                                      
                       
Message ID . . . . . . :   PQT3621
Severity . . . . . . . :   40        
Message type . . . . . :   Information                
                       
                                                      
                       
Message . . . . :   The session with device xxxxx
ended abnormally.       
Cause . . . . . :   The session with device xxxxx at
RMTLOCNAME 199.202.202.43, using PORT 9100, ended
abnormally.  The error code is 20, which indicates one
of the following conditions:
20-39: A communications failure occurred.
40-59: An internal failure occurred.                  
                   
Recovery  . . . :   For error codes 20-39, check for
problems in your network. After correcting the
problem, start the printer writer ( ... )
__________________________________________________

I checked all parms, nothing seems to be wrong. The
network guys confirmed having no problem from their
part.

I extended my tests and defined remote IP OUTQs on the
same printers. They work OK and are always ON, as they
don't have any printer writer attached.

But I cannot use them in IPDS, so I return to the need
of having IP printer writers ...

When I restart the writer, all accumulated spools in
OUTQ are printed normally. But I know next time it
will behave the same and the connexion will be
dropped.

Any ideas ???

Thanks


===
Andrei Centea
Canadelle Inc - Sara Lee Corp.
Montreal
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.