Re: Telnet to an AS400 via NOKIA 9110 GSM telephone -- MIDRANGE-L

Ciao Marco:

The VT100 map is easy to get, basically if you will telnet to your AS400 from a Windows terminal connected locally using the WINDOWS telnet program, it will connect you using VT100. Then after you signon,use the command DSPVTMAP to loop at all the mapped keyboard commands that you need to do to a VT100 connected to the AS400. BTW, the F5 key is ESC then 5. Page up is CTL + U, Page down is CTL + D, error reset is ESC +R. You will get the hang of it.

Buon Fortuna:

Carl

Carl Galgano
EDI Consulting Services, Inc.
540 Powder Springs Street
Suite C19
Marietta, GA 30064
770-422-2995
mailto: cgalgano@ediconsulting.com
http://www.ediconsulting.com
EDI, Communications and AS400 Technical Consulting

-----Original Message-----
From: Marco Stanghellini <mstanga@tin.it>
To: MIDRANGE-L@midrange.com <MIDRANGE-L@midrange.com>
Date: Friday, May 21, 1999 5:18 PM
Subject: Telnet to an AS400 via NOKIA 9110 GSM telephone

Hi everybody,

I'm from Italy.

Just a few days ago i got my brand new NOKIA 9110 GSm telephone.

It's very impressive.

I used the telnet application to connect remotely to my WAN via our CISCO routers.(mainly through our CISCO 3640)

I can manage IOS CISCo software very well, but problems begin when i try to connect to my AS400 because the telnet inside my NOKIA 9110 is a normal VT100 telent and so i can only use PF1,PF2,PF3, and PF4.

So i can connect, but i can only give some commands but without all the other PF functions is very hard. (I can't give page down or up too)

Does anyone know a secondary way to give the AS400 command like page down or up, PF5----PF24?????

I know that's athe VT100 problem and so I'm asking nokia to give me a better telnet for emulate my AS400 but I'm a little man against a very big company.

Please send me suggestion....

Thank You in advance to all

Marco Stanghellini

EDP Manager

Confartigianato

ITALIA